Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

F16 5.0i EWS alingment!!??
19-04-2018, 19:32 PM,
Post: #1
XZBMW  F16 5.0i EWS alingment!!??
F16 2016 5.0i
the BDC, DME1 and DME2 were replaced. - new parts
The engine does not strat(it does not turn).
After trying to activate the starter motor directly you get the fault the in EWS alignment...
does anyone have any idea which network it is used for ews check or if there is any way to make a force synchronization between the BDC and DME.
Quote this message in a reply
19-04-2018, 19:50 PM,
Post: #2
RE: F16 5.0i EWS alingment!!??
Is it manual or auto?
If automatic transmission isn must be matched
Quote this message in a reply
19-04-2018, 21:18 PM,
Post: #3
RE: F16 5.0i EWS alingment!!??
use ista and mark your new modules as replaced if they are brand new from dealer
Quote this message in a reply
19-04-2018, 22:00 PM,
Post: #4
F16 5.0i EWS alingment!!??
If programmed & coded correctly in esys you must reset tarter lock in service functions/ engine in ista


Sent from my iPhone using Tapatalk
Quote this message in a reply
20-04-2018, 07:13 AM,
Post: #5
RE: F16 5.0i EWS alingment!!??
I can not use ISTA for programming because there are some modules still missing.
Starter lock reset already done.
Programming and coding performed with esys.
according to description the ews codes are already store from factory in dme and dsc.
Quote this message in a reply
20-04-2018, 15:26 PM,
Post: #6
RE: F16 5.0i EWS alingment!!??
And what errors You have in DME's an BDC ?
Quote this message in a reply


Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content