Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

DDE on F25 2013 failed
20-04-2018, 16:31 PM,
Post: #1
XZBMW  DDE on F25 2013 failed
Hello everybody,


right now I am tormenting myself with a somewhat suspicious thing.

It is a F25 2.0d from 2013.

In the vehicle was due to a mistake of the staff (no charger connected) deeply discharged the battery.

The battery was replaced, original identical Varta!

I wanted to register with Inpa and Rei **** ld the battery exchange, but unfortunately the DME is not diagnose capable, vehicle of course does not start, makes no noise, even the starter is dead.

Motor fuses / relays are OK. WakeUP line at the DDE is fine. Power supply at the DDE is also available.

Access to DDE with all common tools not possible!

Could it be that the DDE got a bad battery?

Technical defect on lines ground connection, etc., I can rule out, everything has been carefully examined under the microscope?


Would be very grateful

Coding E + F + G Modelles in near from Passau in Germany (Bavaria)!
Navigationmaps Updates for E + F + G Modells!
I-Data Update on E + F - Modells.
Repair FRM3 & LM !!


Quote this message in a reply
24-04-2018, 09:30 AM,
Post: #2
RE: DDE on F25 2013 failed
(20-04-2018, 16:31 PM)Illuminati23 Wrote:  Hello everybody,


right now I am tormenting myself with a somewhat suspicious thing.

It is a F25 2.0d from 2013.

In the vehicle was due to a mistake of the staff (no charger connected) deeply discharged the battery.

The battery was replaced, original identical Varta!

I wanted to register with Inpa and Rei **** ld the battery exchange, but unfortunately the DME is not diagnose capable, vehicle of course does not start, makes no noise, even the starter is dead.




Motor fuses / relays are OK. WakeUP line at the DDE is fine. Power supply at the DDE is also available.

Access to DDE with all common tools not possible!

Could it be that the DDE got a bad battery?

Technical defect on lines ground connection, etc., I can rule out, everything has been carefully examined under the microscope?


Would be very grateful

disconnect batery for 5 mins and try agin if still nothing then your dde is broken
i can help and i have in the stock DDE
Quote this message in a reply
24-04-2018, 12:39 PM,
Post: #3
RE: DDE on F25 2013 failed
Please initialize FlexRay bus and all will be good.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Entrynav2 FI failed to install FSC pack Pedrom92 7 351 06-03-2024, 22:18 PM
Last Post: Billyjoe69
  F15 Hybrid failed battery pack? willisodhiambo 0 100 26-02-2024, 08:08 AM
Last Post: willisodhiambo
  Bdc Flash failed at 99% SWFL_0000241a sambir 17 1,320 14-02-2024, 14:00 PM
Last Post: sambir
XZBMW Solved ✔ looking for a very old psdzdata probably 2012-2013 azwgh 2 198 06-02-2024, 13:24 PM
Last Post: azwgh
  Ista mesuring plan failed giando11 2 211 06-02-2024, 08:11 AM
Last Post: Node
  NBT Evo flash failed and v850 clear makes some troubles flashkazama 14 1,172 19-01-2024, 14:59 PM
Last Post: Limespirit
  Help G70: ISTA AOS -The automatic Secure Token request failed DarkSide 10 812 07-01-2024, 09:53 AM
Last Post: DarkSide
  Ista failed calculating measure plan giando11 0 199 15-10-2023, 08:02 AM
Last Post: giando11
  HU Entrynav2 programming failed with Esys kaan12345 7 931 14-10-2023, 19:27 PM
Last Post: naderlouis
XZBMW Help Esys flashing G05 ACSM EGS RAM failed Enforc3r 5 540 14-10-2023, 16:57 PM
Last Post: SweetBMW

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content