Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
How can connect digiprog 3 to pc and save the dumps?
|
20-06-2014, 08:16 AM,
Post: #11
|
|||
|
|||
|
RE: How can connect digiprog 3 to pc and save the dumps?
I tried many variations
I can not log on windows 7 I have not tried the other windows there is someone who managed to connect to windows 7 digiprog? tnk |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
16-09-2014, 20:24 PM,
Post: #12
|
|||
|
|||
|
RE: How can connect digiprog 3 to pc and save the dumps?
I have the same problem, win 7 , software installed correctly, drivers installed...no conection to DiagProg3. however eetool can connect to the unit (a message is poping on the device screen "wait connection".
I can see some files on eetool and that is all. No connection to Diagprog3 software. anyone knows if we can select the com port in diagprog software ??? |
|||
|
|
|
16-09-2014, 20:38 PM,
Post: #13
|
|||
|
|||
|
RE: How can connect digiprog 3 to pc and save the dumps?
If you see the files in eetoll than its all ok, this is only for load files in the digi and load to computer, you can not use digi in this time for other solutions
 read eeprom, save to computer or othr side, but you can than load this eeprom files to eeprom
Stop worrying about what can go wrong, and get excited about what can go right.
PRESS THANKS IF YOU LIKE MY POST AND IT HELPED YOU  |
|||
|
|
|
16-05-2015, 15:14 PM,
Post: #14
|
|||
|
|||
|
RE: How can connect digiprog 3 to pc and save the dumps?
Hallo.
I have digiprog3 sn9c60160000. I open the cassing diprog 2 chip missing. Please help what the serial the chip. |
|||
|
|
|
20-05-2015, 12:13 PM,
Post: #15
|
|||
|
|||
|
RE: How can connect digiprog 3 to pc and save the dumps?
You need chip U11... FT232BL. I'm today soldering and it works.
|
|||
|
|
|
20-05-2015, 16:00 PM,
Post: #16
|
|||
|
|||
|
RE: How can connect digiprog 3 to pc and save the dumps?
@4 key..... The big one chip ftdi ft 232 bl.and the small one smd 8pin what chip...?
|
|||
|
|
|
21-05-2015, 06:02 AM,
Post: #17
|
|||
|
|||
|
RE: How can connect digiprog 3 to pc and save the dumps?
Should be U12 93c56
For me, the only thing missing FT232BL. Yesterday soldered and everything works. Watch out for drivers FTDI. I have CDM 2.10.00 Certified and is OK. CDM 2.12.00 "brick" chip in my K-DCAN (BMW) so do not risked. |
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
