[meiguang]

Here is new HDS 3.102.051 and latest ihds, and also latest J2534 rewrite:

About the immo, i think, must be hacked for ihds, because still doesn't work even using the latest one.

Rule 3: Do not Post Links on the Board! External links to files must be attached in a notepad file.

Thanks, Admin

Like this

[Dave1989]

hello,what hardware can this software run on?

[koziol]

Was trying to update Honda civic
but no success tried with windows 7 and windows xp
also tried older version same thing is any special procedure do work with that soft
see attachmant

[xtac1080]

hello,what hardware can this software run on?

I use Autel J2534 tool with great results. I think pretty much any J tool that works with Toyota techstream will work with this.

[meiguang]

hello,what hardware can this software run on?

I use Autel J2534 tool with great results. I think pretty much any J tool that works with Toyota techstream will work with this.

Success on immo? Change module immo?

[xtac1080]

hello,what hardware can this software run on?

I use Autel J2534 tool with great results. I think pretty much any J tool that works with Toyota techstream will work with this.

Success on immo? Change module immo?

I have never had to use the IMMO function in HDS, so I couldn't tell you if it works or not. I've tried to launch the IMMO function through I-HDS but it appears to be missing files or an application.

I'm thinking if you want to use IMMO function, your best bet is to use HDS 3.014 or older and THIS CALCULATOR. I'm not sure what years 3.014 will support, but it should be fairly new vehicles but not the latest.

[meiguang]

hello,what hardware can this software run on?

I use Autel J2534 tool with great results. I think pretty much any J tool that works with Toyota techstream will work with this.

Success on immo? Change module immo?

I have never had to use the IMMO function in HDS, so I couldn't tell you if it works or not. I've tried to launch the IMMO function through I-HDS but it appears to be missing files or an application.

I'm thinking if you want to use IMMO function, your best bet is to use HDS 3.014 or older and THIS CALCULATOR. I'm not sure what years 3.014 will support, but it should be fairly new vehicles but not the latest.

Thanks, version 3.014 does not support Honda jazz 2017, and you are right about missing file on ihds, must using bosch mvci, it's within that honda driver.

[drovid]

Link is dead, can you reapload please.

[Merseycruise]

Hi.

Would somebody be able to tell me if there is a configuration file which needs to be changed to be able to use this software with a JDiag Elite II please. I've installed the JDiag driver but cant see the JDiag in the tool Configuration menu.

[parber]

Good evening everyone i am experiencing a problem.I'm on version 3.012.030 with a good quality HIM dual PCB who was working perfectly until today when i tried to replace a Pcm no mater the codes i generated with this generator it was a faillure.Now the Him is locked and no way to unlock it.Could anybody help me on this one? Thank you.

   


Also all the codes generated for further attempts where not good.What i am doing wrong?
12-E035C
13-96ADA
14-68712
15-6CFBA
16-562A0
17-3EFE5
18-00BC0
19-0436B
20-EC0A8