Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Honda HDS 3.102.051
22-06-2018, 02:30 AM, (This post was last modified: 26-10-2018, 20:27 PM by fraserauto.)
Post: #11
RE: Honda HDS 3.102.051
(22-06-2018, 00:48 AM)parber Wrote:  Good evening everyone i am experiencing a problem.I'm on version 3.012.030 with a good quality HIM dual PCB who was working perfectly until today when i tried to replace a Pcm no mater the codes i generated with this generator it was a faillure.Now the Him is locked and no way to unlock it.Could anybody help me on this one? Thank you.




Also all the codes generated for further attempts where not good.What i am doing wrong?
12-E035C
13-96ADA
14-68712
15-6CFBA
16-562A0
17-3EFE5
18-00BC0
19-0436B
20-EC0A8
Try current year 18 and install PCM in Immobilizer also if him locked use VCM2 thats interface i used OK readbiggrin
[+] 2 users say Thank You to fraserauto for this post
22-06-2018, 19:04 PM,
Post: #12
RHonda  RE: Honda HDS 3.102.051
(22-06-2018, 02:30 AM)fraserauto Wrote:  
(22-06-2018, 00:48 AM)parber Wrote:  Good evening everyone i am experiencing a problem.I'm on version 3.012.030 with a good quality HIM dual PCB who was working perfectly until today when i tried to replace a Pcm no mater the codes i generated with this generator it was a faillure.Now the Him is locked and no way to unlock it.Could anybody help me on this one? Thank you.




Also all the codes generated for further attempts where not good.What i am doing wrong?
12-E035C
13-96ADA
14-68712
15-6CFBA
16-562A0
17-3EFE5
18-00BC0
19-0436B
20-EC0A8
Try current year 18 and install PCM in Immobilizer also if him locked us VCM2 thats interface i used OK readbiggrin
Hi CT,just try this it's work for me in the past for GNA600,just put computer to 2008 and input code for attempts,thanks.


Attached Files
Unlock GNA600 Immo.rar
File Type: .rar
Downloaded: 111 times
Size: 614 bytes

[+] 6 users say Thank You to Starmobile for this post
25-07-2018, 21:08 PM,
Post: #13
RE: Honda HDS 3.102.051
Hello colleagues, does anyone have a complete installation kit with video andi driver for avd or mongose?

thanks in advance
14-10-2018, 06:12 AM,
Post: #14
RE: Honda HDS 3.102.051
(16-04-2018, 16:55 PM)meiguang Wrote:  Here is new HDS 3.102.051 and latest ihds, and also latest J2534 rewrite:

About the immo, i think, must be hacked for ihds, because still doesn't work even using the latest one.


Rule 3: Do not Post Links on the Board! External links to files must be attached in a notepad file.

Thanks, Admin

Like this  under

hi dear pleas help me.


i want to calibrate honda dual clutch , i had to honda hds .( it is clone , not original). and i tried to your new software. but not support honda vezel (  like honda grace , honda fit gp5) dual clutch calibrate . can you help me out .....

https://binged.it/2yyb2Uk
14-10-2018, 09:00 AM, (This post was last modified: 14-10-2018, 09:06 AM by Clusters.)
Post: #15
RE: Honda HDS 3.102.051
(14-10-2018, 06:12 AM)denuka eranda Wrote:  hi dear pleas help me.


i want to calibrate honda dual clutch , i had to honda hds .( it is clone , not original). and i tried to your new software. but not support honda vezel (  like honda grace , honda fit gp5) dual clutch calibrate . can you help me out .....

https://binged.it/2yyb2Uk

Honda Grace is.japan version, you should change to japan region, dual clutches it means idcd? Sport hybrid car?

yes I love you All handshake
thumbsup thumbsup thumbsup
26-10-2018, 01:36 AM, (This post was last modified: 26-10-2018, 01:38 AM by Phuong.)
Post: #16
RE: Honda HDS 3.102.051
(21-05-2018, 07:49 AM)meiguang Wrote:  
(16-05-2018, 04:34 AM)xtac1080 Wrote:  
(16-05-2018, 02:38 AM)meiguang Wrote:  
(29-04-2018, 09:51 AM)xtac1080 Wrote:  
(27-04-2018, 00:36 AM)Dave1989 Wrote:  hello,what hardware can this software run on?

I use Autel J2534 tool with great results. I think pretty much any J tool that works with Toyota techstream will work with this.
Success on immo? Change module immo?

I have never had to use the IMMO function in HDS, so I couldn't tell you if it works or not. I've tried to launch the IMMO function through I-HDS but it appears to be missing files or an application.

I'm thinking if you want to use IMMO function, your best bet is to use HDS 3.014 or older and THIS CALCULATOR. I'm not sure what years 3.014 will support, but it should be fairly new vehicles but not the latest.
Thanks, version 3.014 does not support Honda jazz 2017, and you are right about missing file on ihds, must using bosch mvci, it's within that honda driver.

If the Bosch MVCI you're talking about is this: see attachment for link
I can tell you the immo functions do not work either. Some where along the way when HDS had i-HDS added on, the immo drivers were removed. I have that MVCI and I cannot program keys either.

I hired a locksmith to program a key on a 2018 Acura and he used a much simpler tool. I believe it is the Autool XTOOL X100 Pro. I ordered one on Amazon and I'll let you guys know how it goes when I receive it.


Attached Files
mvcilink.txt
File Type: .txt
Downloaded: 48 times
Size: 67 bytes

[+] 1 user says Thank You to Phuong for this post
28-10-2018, 17:27 PM,
Post: #17
J2534 error
I've seen another user here facing the same issue as me but still nobody has a solution.
I'm not sure what I'm doing wrong.
The HDS works fine in GNA600 mode, I use a HDS miniVCI from ebay, firmware version 1.4.1 as detected by xHorse.
When I try the J2534 app in win7x86, it crashes after trying to read the car, after I hit START.
When I try to run it in XPx86 it can't even start up, reports error 57. Same happens when I try to run it from win7 in XPsp3 compatibility mode.
Does anyone have a solution to this?
The error has something to do with the DS253432-04.dll I think.
I am trying to update the ECU on a 2007 Accord CL9.


Attached Files Thumbnail(s)
           
30-10-2018, 04:44 AM,
Post: #18
RE: J2534 error
(28-10-2018, 17:27 PM)Atrax Wrote:  I've seen another user here facing the same issue as me but still nobody has a solution.
I'm not sure what I'm doing wrong.
The HDS works fine in GNA600 mode, I use a HDS miniVCI from ebay, firmware version 1.4.1 as detected by xHorse.
When I try the J2534 app in win7x86, it crashes after trying to read the car, after I hit START.
When I try to run it in XPx86 it can't even start up, reports error 57. Same happens when I try to run it from win7 in XPsp3 compatibility mode.
Does anyone have a solution to this?
The error has something to do with the DS253432-04.dll I think.
I am trying to update the ECU on a 2007 Accord CL9.

What is the database date of your CM Update? It shows up on the main screen after launching the application.
29-06-2019, 11:54 AM,
Post: #19
RE: Honda HDS 3.102.051
Honda hds this function is locked note obtain the release password from MaRIS or Genpo/Distributor(Europe/general)

VIN: 20754
date: 062808

please i've been locked out


Possibly Related Threads…
Thread Author Replies Views Last Post
RHonda Honda HDS iHDS 2022-01 xtac1080 13 4,791 19-02-2024, 07:53 AM
Last Post: Rashid
RHonda Honda HDS With Ford VCM 2 supunlahiru11 13 7,207 24-10-2023, 17:58 PM
Last Post: ozzytomi
  Honda Accord 2005 2.0 vvti specialist nedeed sorin.henea 0 111 16-10-2023, 06:54 AM
Last Post: sorin.henea
  Solved ✔ Ori map for Honda Accord 2.0 VVTI 2004 sorin.henea 1 166 16-10-2023, 06:46 AM
Last Post: sorin.henea
RHonda Honda Vezel Gearbox issueneed to update Software autocar15 0 334 23-01-2023, 11:28 AM
Last Post: autocar15
RHonda Honda HDS 3.104.002 & I-HDS 1.006.004 torrent. PsiDOC 1 2,063 09-11-2022, 11:25 AM
Last Post: test01
  2014 Honda Fit OBD / DLC Adapter Tracshan 8 972 01-11-2022, 16:37 PM
Last Post: Tracshan
RHonda Will Mini-VCI J2534 interface for Toyota work for Honda HDS??? jasonbaby 2 1,630 07-04-2022, 19:59 PM
Last Post: jasonbaby
RHonda I search anybady can my abs coding honda civic 2006 .near in Düsseldorf dleer2007 1 584 06-04-2022, 22:56 PM
Last Post: xtac1080
RHonda hallo I search ABS honda civic hybrid 2006 please help dleer2007 0 585 18-03-2022, 22:02 PM
Last Post: dleer2007

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content