[rommonkeyy]

i just tried it.
if i read it verfy ok but if i try to write verfyerror

[Le-Mans]

i just tried it.
if i read it verfy ok but if i try to write verfyerror

Have you another eeprom?

[rommonkeyy]

Yes i do have another one.

Gesendet von meinem EVA-L09 mit Tapatalk

---

I do have another Modul it needs to be geht out of car .

Gesendet von meinem EVA-L09 mit Tapatalk

[darek_naprawa]

Do you read eprom and do not see that carprog did not read anything?
Think a bit before you break the airbag module.

---

Do not save another bin, you have to clear the read file.
If you save another one may not work.
The module encoding is saved in the file.

[rommonkeyy]

Same Problem

Gesendet von meinem EVA-L09 mit Tapatalk

[darek_naprawa]

You probably have a damaged carprog.
Replace 74hc125.
You can try reading with the power supply.
Use a4 adapter

[mikroel]

If it is just chinease carprog whatever version , then you can not expecting nothing better .

It was explained many times on the forums .
Must be reworked !


Sent from my iPhone using Tapatalk

[rommonkeyy]

Yes i do have a chines Carprog V10.05

What needs to be reworked?

Gesendet von meinem EVA-L09 mit Tapatalk

---

You probably have a damaged carprog.
Replace 74hc125.
You can try reading with the power supply.
Use a4 adapter

Can i you this Diagramm also for chines Carprog A4 Adapter?

Gesendet von meinem EVA-L09 mit Tapatalk

---

Here is a Picture of wires from chines Carprog A4 Adapter
1. Blue
....
8. Purple


Gesendet von meinem EVA-L09 mit Tapatalk

[kidloco]

Your epp read is not good fffffff in dump only try to conect 12v when read

[rommonkeyy]

If I try read with 12 v i get verfy Error .But it reads Something
. Without 12v verfy OK but it reads nothing.

Gesendet von meinem EVA-L09 mit Tapatalk