Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
[SOLVED] F25 ECU MSV90 - CAFD coding problem
16-05-2018, 07:06 AM,
(This post was last modified: 12-06-2018, 07:41 AM by matigdy.)
Post: #1
|
|||
|
|||
[SOLVED] F25 ECU MSV90 - CAFD coding problem
Hi,
I flashed whole car with esys 3.31.0 with 3.60 psdzdata. All goes ok but ECU. MSV90 flashed ok but esys cant code it after flash. I try with ISTA/P and is the same, ista cant code. Now fuel pump works all time, car start and I can drive but with power reduction. DME have no cafd. When I choose Detect CAF from SWE and try code there is an error: Caf's suchen Tal wird generiert Abarbeitung wird gestartet Read SVT before TAL execution started. Read SVT before TAL execution finished. TAL execution started. VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197] ExecutionID=2018/05/16-08:57:08.578 [] prepareTALExecution started [PROGRESS] [] prepareTALExecution finished [PROGRESS] [] prepareVehicleForCoding started [PROGRESS] [] prepareVehicleForCoding finished [PROGRESS] [DME - 12] prepareECUforCoding started [PROGRESS] [DME - 12] prepareECUforCoding finished [PROGRESS] [DME - 12] authenticateECUforCoding started [PROGRESS] MCDDiagService<id=16636, job=com.bmw.psdz.jobs.uds.MCD3_AuthenticateECUforCoding, service=SA_SK - SecurityAccessSendKey, description=error: negative response : requestSequenceError, link=DME_12_ETHERNET> [DIAGSERVICE] MCDDiagService<id=16600, job=com.bmw.psdz.jobs.uds.MCD3_AuthenticateECUforCoding, service=SA_SK, description=error: negative response, link=Physical request to ECU with address 0x12> [DIAGSERVICE] [] job failed with negative response error: code: service returned global negative response description: Service SA_SK returned a negative response with response code requestSequenceError; LinkName: DME_12_ETHERNET severity: ERROR [THROWABLE] [DME - 12] There was an error during TAL execution, please check the log files. [WARN] [DME - 12] finalizeECUCoding started [PROGRESS] [DME - 12] finalizeECUCoding finished [PROGRESS] [] finalizeVehicleCoding started [PROGRESS] [] finalizeVehicleCoding finished [PROGRESS] [] finalizeTALExecution started [PROGRESS] [] finalizeTALExecution finished [PROGRESS] TAL execution finished [TAL_EXECUTION_FINISHED] TAL-Execution finished with status: "FinishedWithError". [C207] TAL execution finished. Duration: "9s". [C206] Read SVT after TAL execution started. Read SVT after TAL execution finished. Abarbeitung beendet Transaktions-Report: Aktion: Codieren DME [12] cdDeploy FinishedWithError cafd_00000721-003_006_000 NotExecutable How can I code it ? Maybe I will try with FDL code? Have anyone CAFD_00000721_003_006_000.ncd file ? regards, Mati |
|||
16-05-2018, 14:18 PM,
Post: #2
|
|||
|
|||
RE: F25 ECU MSV90 - CAFD coding problem
I dont see this error before. What that is mean ?
Especially: service=SA_SK - SecurityAccessSendKe MCDDiagService<id=16636, job=com.bmw.psdz.jobs.uds.MCD3_AuthenticateECUforCoding, service=SA_SK - SecurityAccessSendKey, description=error: negative response : requestSequenceError, link=DME_12_ETHERNET> [DIAGSERVICE] MCDDiagService<id=16600, job=com.bmw.psdz.jobs.uds.MCD3_AuthenticateECUforCoding, service=SA_SK, description=error: negative response, link=Physical request to ECU with address 0x12> [DIAGSERVICE] [] job failed with negative response error: code: service returned global negative response description: Service SA_SK returned a negative response with response code requestSequenceError; LinkName: DME_12_ETHERNET severity: ERROR |
|||
16-05-2018, 18:12 PM,
Post: #3
|
|||
|
|||
RE: F25 ECU MSV90 - CAFD coding problem
Are you using the original power class?
|
|||
16-05-2018, 22:31 PM,
Post: #4
|
|||
|
|||
RE: F25 ECU MSV90 - CAFD coding problem
remove the ecu and code it another car. I saved an acsm this technique. probably your problem on your zgw.
|
|||
04-06-2018, 09:45 AM,
(This post was last modified: 04-06-2018, 09:51 AM by matigdy.)
Post: #5
|
|||
|
|||
RE: F25 ECU MSV90 - CAFD coding problem
Can't code in another car (there is no other N53 with MSV90 ecu) but I think it will not do anything.
I change ZGW (try two diffrent) still no luck, same problem. I flashed whole car with 3.60 and all modules flashed ok and coding ok but ECU flashed but no coding. Still have no CAFD in ECU list and still can't code, error the same. Maybe in this psdzdata is some problem with proper firmware version to this ECU? Print screen from E-sys DME ecu. It is F25 N53 USA version. |
|||
04-06-2018, 10:32 AM,
Post: #6
|
|||
|
|||
RE: F25 ECU MSV90 - CAFD coding problem
Hello!
Are you sure that you are using your original VO and not a modified one with an ECE key type inside? Got this error message last time when I flashed an US car with an ECE key type and forgot to change this before flashing the DME. CU Oliver |
|||
04-06-2018, 10:53 AM,
Post: #7
|
|||
|
|||
RE: F25 ECU MSV90 - CAFD coding problem
(04-06-2018, 10:32 AM)milkyway Wrote: Hello! Yes, you can be right. I changed from typeKey = "WX53" USA to typeKey = "WX51" ECE. And I think I forgot to change back before flashing. Now back to WX53 and flashed, it change swfl but still coding not possible. Any suggestions? What did you do in your case? |
|||
05-06-2018, 10:39 AM,
Post: #8
|
|||
|
|||
RE: F25 ECU MSV90 - CAFD coding problem
(04-06-2018, 10:53 AM)matigdy Wrote:(04-06-2018, 10:32 AM)milkyway Wrote: Hello! Hello, I am just a newbie about BMW. Do you try to use Tool32 to search commands about security access? This is just my point and trying to help. BR, |
|||
05-06-2018, 15:22 PM,
Post: #9
|
|||
|
|||
RE: F25 ECU MSV90 - CAFD coding problem
Why do you use esys with launcher from token master for non FDL coding?
Try without launcher. |
|||
06-06-2018, 12:23 PM,
(This post was last modified: 06-06-2018, 12:29 PM by matigdy.)
Post: #10
|
|||
|
|||
RE: F25 ECU MSV90 - CAFD coding problem
I tried without launcher, nothing change still same error.
Someone told me that maybe this is problem to switch ECU in programming mode. I tired flashed once more time to ECE (flash ok, no coding possible) then I flash back to US and swfl flashed ok but still no cafd then I detect and choose CAFD_00000721_003_006_000 and there is above error. Have someone CAFD file: CAFD_00000721_003_006_000 or CAFD_00000721_003_005_002 ? I think I need .ncd file read from working ECU? |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
FDL coding BMW Apps | Mugga | 2 | 72 |
1 hour ago Last Post: Mugga |
|
Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,359 |
8 hours ago Last Post: smilo |
|
Coding a F80 M3 race car | PeterY | 10 | 465 |
Yesterday, 23:32 PM Last Post: Furgus |
|
NBT Evo CAFD missing after coding error | Mugga | 13 | 594 |
24-04-2024, 22:47 PM Last Post: Mugga |
|
6wb cluster swap and coding | xMoses | 4 | 227 |
22-04-2024, 19:07 PM Last Post: NikolaIMRS |
|
M performance brake DSC2 SBRE coding | Ckh091020 | 3 | 216 |
22-04-2024, 12:58 PM Last Post: Ckh091020 |
|
pulling both paddles put transmission into neutral coding | tintoverano | 1 | 117 |
22-04-2024, 12:42 PM Last Post: raresh.tazz |
|
NBT EVO Connected Drive problem after update I-Level | SkeYT | 47 | 4,707 |
22-04-2024, 11:44 AM Last Post: kwat |
|
F20 LCI2 black panel cluster coding | sqorpius | 9 | 2,010 |
21-04-2024, 12:38 PM Last Post: Adekborys69 |
|
G01 2019 X3 - ATM Replacement/Coding Help Needed | jchisholm17 | 10 | 454 |
18-04-2024, 21:44 PM Last Post: jchisholm17 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content