Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Opel signum 3.0CDTI
01-06-2018, 11:22 AM,
Post: #1
|
|||
|
|||
Opel signum 3.0CDTI
Hi mates . I have question. Can I read/write signum denso with ktag 2.23 and without jtag ? I have found image where shows connecting with rainbow wires, that solution by soldering rainbow wires to ecu working ? Maybe any have tested that ecu with this solution ?
|
|||
03-06-2018, 15:45 PM,
Post: #2
|
|||
|
|||
RE: Opel signum 3.0CDTI
(01-06-2018, 11:22 AM)ltujustas Wrote: Hi mates . I have question. Can I read/write signum denso with ktag 2.23 and without jtag ? I have found image where shows connecting with rainbow wires, that solution by soldering rainbow wires to ecu working ? Maybe any have tested that ecu with this solution ? I think that this ecu has AM29F800BB flash if I'm not mistaken, so the best thing is to remove the flash IC and read It and program it on an external flash programmer. |
|||
06-06-2018, 20:56 PM,
Post: #3
|
|||
|
|||
RE: Opel signum 3.0CDTI
(01-06-2018, 11:22 AM)ltujustas Wrote: Hi mates . I have question. Can I read/write signum denso with ktag 2.23 and without jtag ? I have found image where shows connecting with rainbow wires, that solution by soldering rainbow wires to ecu working ? Maybe any have tested that ecu with this solution ? Jtag works! Did 2 of them with rainbow wires. |
|||
06-06-2018, 21:24 PM,
Post: #4
|
|||
|
|||
RE: Opel signum 3.0CDTI
I know that Jtag works, but I don't have them...
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content