[jure5j]

Hi guys!
I have Ford Fiesta 2001 with lost all keys.I have a third key but without transponder.So I cant start the car.I was trying to programm the new (not original)key but unsuccesfully.I was trying with Forscan,Focom and Truecode cable but no luck.I contacted Chris from Keyprogrammers and he told me that in my situation the controler in PCM is unable to generate incode to succesfully add new key.
Is there any chance for me
Thanks in advance for your replies
Jure

[bmwcare]

Hi guys!
I have Ford Fiesta 2001 with lost all keys.I have a third key but without transponder.So I cant start the car.I was trying to programm the new (not original)key but unsuccesfully.I was trying with Forscan,Focom and Truecode cable but no luck.I contacted Chris from Keyprogrammers and he told me that in my situation the controler in PCM is unable to generate incode to succesfully add new key.
Is there any chance for me
Thanks in advance for your replies
Jure

if its >2001 model it does not use incode
also, you should only need 1 key but 2 transponders
i used to do a lot of these years ago when i was young!

[jure5j]

Hi!
The car is 2001.In Forscan I cant add new key because it asks me for outcode.When I generate the incode the software pops up after a few seconds - wrong code.
When I used Truecode it says error retrieving code.At keyprogrammers said that if you like to add a new key You dont need working key but if you want to erase old keys and add new than you need two new transponders.I have two new transponders.

[jure5j]

Problem solved.
You can lock the treath

---

Problem solved.
You can lock the treath

Sorry thread

[bmwcare]

Problem solved.
You can lock the treath

---

Problem solved.
You can lock the treath

Sorry thread

how did you solve the problem?

[jure5j]

Problem solved.
You can lock the treath

---

Problem solved.
You can lock the treath

Sorry thread

how did you solve the problem?

Launch did the job.
There are 2 types of secure access: coded and timed. Coded requires an incode generation by the outcode provided by vehicle. Timed access requires that operator has wait for some period of time (usually 10 minutes) with diagnostic tester connected. Some vehicles support only coded access, some only timed access, some support both.For me it worked with timed access.