Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Error KTAG clone
04-06-2018, 20:21 PM,
Post: #1
|
|||
|
|||
Error KTAG clone
hi friends.
I have KTAG clone with firmware 7.020, it doesn´t read ECU MED17.9.8.When i press the read button, the program doesn´t work andthis is the error message: External excception EEFFACE. Can anybody help me?please |
|||
04-06-2018, 20:30 PM,
Post: #2
|
|||
|
|||
RE: Error KTAG clone
only for this ecu?i had several times this fault and I have changed usb cable.
|
|||
04-06-2018, 21:04 PM,
Post: #3
|
|||
|
|||
RE: Error KTAG clone
It is my first time. I changed usb cable. But doesn't work
|
|||
04-06-2018, 22:38 PM,
Post: #4
|
|||
|
|||
RE: Error KTAG clone
software problem. I have before with kess v2 same problem. or maybe boot wire and cnf1 not conected?
|
|||
04-06-2018, 22:43 PM,
Post: #5
|
|||
|
|||
RE: Error KTAG clone
Maybe SD card corrupt
|
|||
05-06-2018, 02:32 AM,
(This post was last modified: 05-06-2018, 02:34 AM by Dash_Burner.)
Post: #6
|
|||
|
|||
RE: Error KTAG clone
This message appears if you have connection problem between Ktag and PC. Must check usb cable, drivers and correct sw for your firmware. Dont forget to put external 12V power to your K-tag. You said its first time you use it. If all these are checked and OK then its k-tag HW problem.
Regards |
|||
05-06-2018, 06:46 AM,
Post: #7
|
|||
|
|||
RE: Error KTAG clone
Install the software on different computers.
Windows 7 32 Windows 7 64 Windows Xp I always have the same error, I have also changed the 12v power supply. When I press read, the green LED flashes and it seems that it will work, but the software always does not respond in the task manager until it gives the error. Can it be the micro SD? Can it be restored? |
|||
07-06-2018, 11:09 AM,
Post: #8
|
|||
|
|||
RE: Error KTAG clone
Your ktag is bad...
Buy new ktag |
|||
07-06-2018, 20:56 PM,
Post: #9
|
|||
|
|||
RE: Error KTAG clone
|
|||
08-06-2018, 02:46 AM,
Post: #10
|
|||
|
|||
RE: Error KTAG clone
Is it chinese clone, or reworked, or eu clone ?
IF I HELPED TO YOU, USE THX+REP BUTTON.
VAG EDC/MED17, PCR2.1, BCM2, CCM IMMO TRANSFERRING, PKLASSE CHANGE MY GENUINE TOOLS: KESS3, AUTOTUNER, HEXTAG |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content