Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Feedback NEW K-Suite 2.47
18-06-2018, 13:24 PM,
Post: #41
|
|||
|
|||
RE: Feedback NEW K-Suite 2.47
no Stig33
because i read and save the file of the bosch cartronic write the file I have save message change speed impossible i test in speed min and maximun my kess is eu clone 2.47 |
|||
18-06-2018, 14:50 PM,
Post: #42
|
|||
|
|||
RE: Feedback NEW K-Suite 2.47
Do you connected power supply ?
IF I HELPED TO YOU, USE THX+REP BUTTON.
VAG EDC/MED17, PCR2.1, BCM2, CCM IMMO TRANSFERRING, PKLASSE CHANGE MY GENUINE TOOLS: KESS3, AUTOTUNER, HEXTAG |
|||
18-06-2018, 22:09 PM,
Post: #43
|
|||
|
|||
RE: Feedback NEW K-Suite 2.47
off course 11,57v
|
|||
18-06-2018, 23:09 PM,
Post: #44
|
|||
|
|||
RE: Feedback NEW K-Suite 2.47
I think that’s not enough... Try it with 13V...
IF I HELPED TO YOU, USE THX+REP BUTTON.
VAG EDC/MED17, PCR2.1, BCM2, CCM IMMO TRANSFERRING, PKLASSE CHANGE MY GENUINE TOOLS: KESS3, AUTOTUNER, HEXTAG |
|||
19-06-2018, 08:01 AM,
Post: #45
|
|||
|
|||
RE: Feedback NEW K-Suite 2.47
7.1.1 is not that reliable anyway by obd, boot mode is better for it
|
|||
19-06-2018, 12:30 PM,
(This post was last modified: 19-06-2018, 13:52 PM by autronix.)
Post: #46
|
|||
|
|||
RE: Feedback NEW K-Suite 2.47
there is no presentation section , so I salute you all here, and I thanks everybody for for letting me be a part of this large community
thank you ... as for the 2.47 I tested so far (read + write) BMW 320 E46 EDC16C31 OK Ford Focus TDCI 1.6 EDC16C36 OK Peugeot 307CC 1.6/PETROL ME 7.4.5 OK |
|||
Reputation: +1 - dresler [+1] | |||
19-06-2018, 14:56 PM,
Post: #47
|
|||
|
|||
RE: Feedback NEW K-Suite 2.47
Volvo EDC16C31 read-write on K-line...TESTED !
IF I HELPED TO YOU, USE THX+REP BUTTON.
VAG EDC/MED17, PCR2.1, BCM2, CCM IMMO TRANSFERRING, PKLASSE CHANGE MY GENUINE TOOLS: KESS3, AUTOTUNER, HEXTAG |
|||
24-06-2018, 14:35 PM,
Post: #48
|
|||
|
|||
RE: Feedback NEW K-Suite 2.47
MED17.1 2.0 TFSI Audi A5 tested without problems (VR)
EDC16CP34 3.0 TDI without problem EDC17C64 Skoda Octavia without problem (VR) only problem is on getting ID -> have to switch many times the ingnition on off. Then I get an error, that ID can't be read. And after pressing OK it is showing the whole ID and I can save it. If my answer helped to fix anything, then don't forget to give me some rep please!
|
|||
14-07-2018, 22:47 PM,
Post: #49
|
|||
|
|||
RE: Feedback NEW K-Suite 2.47
Mercedes Sprinter 906 2008 edc16c31 Read write obd OK!
If I helped you please use -----> ,
|
|||
15-07-2018, 09:27 AM,
Post: #50
|
|||
|
|||
RE: Feedback NEW K-Suite 2.47
BMW Bosch EDC16+C35 via CAN Read/Write OBD ok
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content