[rs@chip]

Hi guys can someone help me solve this one..car alredy came to me with this fault so I dont no what was changed or not.I made basic setings..sensor G85 showing OK status and dtcs can be erased..after turn wheel L/R esp fault back and showing:

2 Faults Found:
01486 - System Function Test Activated
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 4
Fault Frequency: 1
Reset counter: 187
Mileage: 237906 km
Time Indication: 0
Date: 2018.06.10
Time: 21:20:23

Freeze Frame:
Hex Value: 0x0000
Hex Value: 0x0702
Hex Value: 0x0030
Hex Value: 0x3199
Hex Value: 0x00FF

00778 - Steering Angle Sensor (G85)
013 - Check DTC Memory
Freeze Frame:
Fault Status: 01101101
Fault Priority: 6
Fault Frequency: 2
Reset counter: 187
Mileage: 237906 km
Time Indication: 0
Date: 2018.06.10
Time: 21:24:09

Freeze Frame:
Hex Value: 0x0000
Hex Value: 0x4282
Hex Value: 0x001C
Hex Value: 0x23A1
Hex Value: 0x00FF
here also complete scan from vcds..thanks advanced

[Ashraf6119]

You need to carry out the basic settings for Steering Angle Sensor take it for Road Test to clear your other fault code see below video for your first fault code....


https://www.youtube.com/watch?v=7AVPRj2BNuc

[rs@chip]

You need to carry out the basic settings for Steering Angle Sensor take it for Road Test to clear your other fault code see below video for your first fault code....


https://www.youtube.com/watch?v=7AVPRj2BNuc

I alredy solve 1.one but second one g85 giving me trobale...basic setings performed sucesfuly,position sensor reset to zero..etc all done but dtc wont go

[nek13]

Have you tried all the basic settings with the right steering wheel, and the engine started?
I had the same problem, and I solved it with TEXA because my VCDS clone did not work

[rs@chip]

Have you tried all the basic settings with the right steering wheel, and the engine started?
I had the same problem, and I solved it with TEXA because my VCDS clone did not work

yes I do it with engine of and on..my thots was also vcds could be failing it but cant solve with odis neither

[peca034]

After searing set and fool test you need to stop activation,,, Go on channel 106 and stop..