Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Solved! Opcom V1.99 communication error
18-06-2018, 18:01 PM,
Post: #21
RE: Opcom V1.99 communication error
(18-06-2018, 11:13 AM)mattydr67 Wrote:  Mate forget about that tool to works in Insignia.
You need the lastest versions of opcom not that fake version that you get it for free on forums. You need oficial untouched/original opcom software with license and a real opcom
Good luck

That is not 100% True

I had a chinese clone and the Vauxcom, and i was able to Programm odo funktions on a Insignia 2012.
and read ECU vaultcodes
But not much more was working.

The HQ Clone from Diag Lauter works very well with the Insignia!
Quote this message in a reply
18-06-2018, 18:25 PM, (This post was last modified: 19-06-2018, 02:06 AM by mattydr67.)
Post: #22
RE: Opcom V1.99 communication error
Am I said something about china clones?
Am I said something about opcom made by sklad66 ( sold by diag.laugter-bg ) ?
I said that the tool he has is not a good one and have a not correct MCU
I said also that its better to have the lastest version of opcom
Me for instance I am using original softwares from oficial web sites no cracked no loader as the HQ clone. The 170723c versions I can install it in any computer no need activation for each computer. Just because I am using original softwares not cracked one.
But I didn't said that you cannot use vauxcom with a china clone in Insignia or other cars. I just said that its better to use the lastest software versions of course because you have more options.
The vauxcom 120309a+131223 vauxcom 120309a+160115a are fakes and actually you can do only what vauxcom 120309a do and nothing that 131223 or 160115a cover.
I hope now I was much clear.
Good luck
Quote this message in a reply
[+] 1 user says Thank You to mattydr67 for this post
25-06-2018, 09:48 AM,
Post: #23
RE: Opcom V1.99 communication error
Tip for the ones with the same problem:
If no FW update was attempted and your device can pass fw+bootloader test don't worry countinue reading!
Opcom or Vauxcom clone softwares version 2012 and above changes FTDI eeprom. Following that the drivers can be updated by windows due to hardware change if you had used other drivers than OPCOMUSB.inf, 2008 version, which cause the problem.
Open 2010 china clone and test your interface. If test is passed and you can see the FW version, try automatic vehicle identification. After reading ECM without closing the 2010 program, open vauxcom 120309a. Then choose your desired part to open and enjoy passing "Interface communication error, or interface not powered from car!" error message. If you get error message during working on 120309a try automatic vehicle identification on china clone 2010 again. You can try this cycle as much as you get error. Beside that, 120309a functionalities, database, is still available by this way.
Quote this message in a reply
[+] 1 user says Thank You to irarkh for this post
07-05-2019, 06:40 AM,
Post: #24
RE: Solved! Opcom V1.99 communication error
Hi! Please help me, need firmware v1.95 for opcom. Thanks!
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Error Opel Global TIS MORKAS 3 643 15-09-2022, 21:24 PM
Last Post: MORKAS
  OPCOM "NEW" V1.99 does not communicate with ESC (ECU does not reply, please wait 2 se lim0nade 30 8,267 20-03-2022, 17:01 PM
Last Post: mattydr67
  Opcom Motherboard version (can't find USB drivers) BrainBT 5 1,364 17-10-2019, 17:18 PM
Last Post: skyline
  Opcom Bootloader Repair with TL866 ICSP port aki1 3 1,621 07-10-2019, 13:07 PM
Last Post: avepla
  Opcom HQ Installers 2017 Gabriel87 18 10,347 30-09-2019, 22:30 PM
Last Post: AIR0
  opcom clone need help to repair autosolutions 1 814 18-09-2019, 02:40 AM
Last Post: mattydr67
  OPCOM problem conecting CrossMan 22 5,282 02-08-2019, 05:18 AM
Last Post: mattydr67
KOpel OPCOM china for win7 or win10 josef1708 7 4,518 26-06-2019, 22:27 PM
Last Post: MartinB
  [SOLVED] GM MDI AD HOC WIFI SETUP Ecutech 0 916 19-02-2019, 23:17 PM
Last Post: Ecutech
KOpel Software Opcom Hq v12, v13 ,v15 and Vaux com v13, v16 McMihai 19 12,711 30-12-2018, 22:56 PM
Last Post: Moldovan1

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content