Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

DIY Beginner - ICOM/Kess/Coding
01-07-2018, 16:47 PM,
Post: #11
RE: DIY Beginner - ICOM/Kess/Coding
(25-06-2018, 07:31 AM)willisodhiambo Wrote:  
(22-06-2018, 09:59 AM)djcarbon Wrote:  Dang. Keep it coming. I’m sure this will help others as well as whatever I can try to glean from it. sweating sweating sweating

---------------------------------

Did my first FRM recovery successfully. Very fulfilling..

So this car's FRM3 just went dead. Red in ISTA. I have VVDI pro
Got a dump from some good chap, first convert the Pflash to EEprom, then created an EEprom sector in the FRM. Then wrote to the EEPROM. Success. FRM back to life.

Next I wand to clone a CAS 2. Still waiting to try the lambda delete.

I have a new problem. I can read from my Kess and started my work on the car only to realize that my ECU isn't in the protocol list! Writing will be impossible! It only shows a Bosch ECU for the N43B20 but I have a Continental.

How do I get additional Protocols?
Quote this message in a reply
02-07-2018, 07:02 AM,
Post: #12
RE: DIY Beginner - ICOM/Kess/Coding
(01-07-2018, 16:47 PM)djcarbon Wrote:  
(25-06-2018, 07:31 AM)willisodhiambo Wrote:  
(22-06-2018, 09:59 AM)djcarbon Wrote:  Dang. Keep it coming. I’m sure this will help others as well as whatever I can try to glean from it. sweating sweating sweating

---------------------------------

Did my first FRM recovery successfully. Very fulfilling..

So this car's FRM3 just went dead. Red in ISTA. I have VVDI pro
Got a dump from some good chap, first convert the Pflash to EEprom, then created an EEprom sector in the FRM. Then wrote to the EEPROM. Success. FRM back to life.

Next I wand to clone a CAS 2. Still waiting to try the lambda delete.

I have a new problem. I can read from my Kess and started my work on the car only to realize that my ECU isn't in the protocol list! Writing will be impossible! It only shows a Bosch ECU for the N43B20 but I have a Continental.

How do I get additional Protocols?

I found some ECUs are not OBDII readable so you have to bench them and use another programmer like KTAG. Under protocols you can also pick an ECU with near architecture but never tried it myself. I noticed this problem when I tried reading an MSV45 ECU for a 520 using the 530i protocol. Failure.
Quote this message in a reply
09-10-2018, 13:59 PM,
Post: #13
RE: DIY Beginner - ICOM/Kess/Coding
(25-06-2018, 07:31 AM)willisodhiambo Wrote:  
(22-06-2018, 09:59 AM)djcarbon Wrote:  Dang. Keep it coming. I’m sure this will help others as well as whatever I can try to glean from it. sweating  sweating sweating

---------------------------------

Did my first FRM recovery successfully. Very fulfilling..

So this car's FRM3 just went dead. Red in ISTA. I have VVDI pro
Got a dump from some good chap, first convert the Pflash to EEprom, then created an EEprom sector in the FRM. Then wrote to the EEPROM. Success. FRM back to life.

Next I wand to clone a CAS 2. Still waiting to try the lambda delete.

Very, very cool. You have screenshots to guide those who need it?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  CCC flash WINKFP ICOM BimmerSLO 8 99 46 minutes ago
Last Post: Mefiuu92
XZBMW BMW F34 LHD to RHD heated seats retrofit coding Schnitzer 2 17 3 hours ago
Last Post: Schnitzer
  BMW F10 RHD to LHD coding? morto 10 1,226 Yesterday, 06:57 AM
Last Post: muskatas
  [MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 102 34,795 27-03-2024, 05:59 AM
Last Post: hashtagmaster
XZBMW G15 remember last driving mode & ECO PRO MSA memory coding duss46 7 344 26-03-2024, 18:56 PM
Last Post: duss46
XZBMW coding g12 remote key /m display redog4dy 5 197 26-03-2024, 07:23 AM
Last Post: Siki78
XZBMW Poor wifi signal from new ICOM's bmchicago 1 140 26-03-2024, 03:04 AM
Last Post: rocdeng
  Some news, secure coding coming to new bikes :/ Node 8 1,017 25-03-2024, 15:13 PM
Last Post: RuleNormaliai
  Need help coding out SOS BMW E60 tigre 8 200 24-03-2024, 21:25 PM
Last Post: jararak
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 16 3,909 24-03-2024, 11:29 AM
Last Post: Twointje

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content