[ultimate]

Hello
simple media (hu-b) has been replaced by nbtevo (hu-h)
and retrofiting rear view camera
ecu trsvc (aka icam) in the tree-ecu is (green)
icam, hu, pma - coded
camera icon when "power"(rear drive) is
but image is not displayed and the test image is not displayed

Errors - CD0600 and E1C600 disconnection Ithernet ZGM (ZGW) and HU
connector oabr sends greetings or what did not finish?
ithernet is checked HU to BDC, the connection is made according to scheme
   
ecu camera (icam) in tree-ecu is - ithernet see icam, correctly think?
break connection Internet HU-BDC
i think OABR or something else?

[ChampioNbg]

Hello
simple media (hu-b) has been replaced by nbtevo (hu-h)
and retrofiting rear view camera
ecu trsvc (aka icam) in the tree-ecu is (green)
icam, hu, pma - coded
camera icon when "power"(rear drive) is
but image is not displayed and the test image is not displayed

Errors - CD0600 and E1C600 disconnection Ithernet ZGM (ZGW) and HU
connector oabr sends greetings or what did not finish?
ithernet is checked HU to BDC, the connection is made according to scheme

ecu camera (icam) in tree-ecu is - ithernet see icam, correctly think?
break connection Internet HU-BDC
i think OABR or something else?

Hello,

try to change camera ecu type from trsvc to icam in hu_nbt.

greets

[ultimate]

Hi
HU_NBT_EVO > EXBOX 3001 > CAM_ECU = wert_25
HU_NBT_EVO > EXBOX 3001 > CAMERA_SYSTEM = icam2_rvc
HU_NBT_EVO > EXBOX 3001 > ICAM2_HELLIGKEIT_KONTRAST = aktiv
HU_NBT_EVO > EXBOX 3001 > MACRO_RV_C = aktiv

TRSVC - aka ICAM in REINGOLD\ISTA (always displays and when rear view camera 3AG and when cameras 5DM and 5DN)

E_Sys ICAM4 for G-ser

[gt678]

If I look at the wiring diagrams, I can see the Icam is pluged to BDC and you haven´t wrote you coded this also, or have you?

[ultimate]

If I look at the wiring diagrams, I can see the Icam is pluged to BDC and you haven´t wrote you coded this also, or have you?

Hi
when retrofit rear view camera (3AG)
nothing changes in the BDC
Ithernet-bus BDC-HU not changes - only connection changes (pins)
but i all the same coded BDC

[gt678]

Hm, an other idea, because these days I had similar Problems with a F20 from 2018, if you calculate the SVT_soll does he want the BDC to be exchanged?

I want your car working, because a customer of me also wants a RVC in his G30

[ultimate]

Hm, an other idea, because these days I had similar Problems with a F20 from 2018, if you calculate the SVT_soll does he want the BDC to be exchanged?

I want your car working, because a customer of me also wants a RVC in his G30

Hi
thanks
auto 11.2017 camera same year and cafd was in the right range
when coding the BDC with 3AG option, nothing changes
the Ithernet-Bus between BDC-HU remains physically
only the connection (PINS) changes
error - break Ithernet-Bus BDC-HU(NBT EVO)
if i put back (with pins changes) HU-B (ENTRY EVO) there are no errors on Ithernet-Bus
as if NBT EVO break OABR connector
i do not know what to think

found CAFD from BDC and NBT EVO from auto with 3AG
everything i need is same(кивать головой)

[gt678]

Anything new, is it working?

[F32_PiccoloPiccolo]

Is the quality of the latest ICAM camera better than the previous ones - say on F models 2015-2016 cars? Someone who drove the latest X3 model said it appeared like a UHD camera as compared to his previous F06 2015 model. Are these UDH or just better than previous rear view camera - RESOLUTION wise and when put into practical use?

[Krysiaman]

I will bring this thread back to life because I have similar problem.

G30 with retrofitted NBT EVO and now I have retrofitted ICAM4. Everything is connected as it should be according to schemes. Ethernet from camera and from HU-H directly to BDC. There is no Ethernet Switch in car.
There is no image from camera in PDC screen, and I can't select assting lines. I have flashed whole car but I cant update the HU because of strange errors with switching into programming mode.