Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Mercedes key programmer
12-04-2014, 04:39 AM,
Post: #1
|
|||
|
|||
Mercedes key programmer
Hi ALL,
about the key programmer tools, Which tool is the best for mercedes key programming? Have any one used CKM100 or CKM200 for programming a mercedes key!! and where do u suggest I buy them Many thanks in advance |
|||
12-04-2014, 12:04 PM,
Post: #2
|
|||
|
|||
RE: Mercedes key programmer
MB key prog 2, it is very good
|
|||
23-05-2014, 22:39 PM,
Post: #3
|
|||
|
|||
RE: Mercedes key programmer
Avdi fvdi key programmer
i have ak500+ and very good programmer |
|||
24-07-2014, 08:16 AM,
Post: #4
|
|||
|
|||
RE: Mercedes key programmer
Will Say Mercedes instrument is the better and have most utility and more option if you want to expend your tool.
|
|||
24-07-2014, 09:47 AM,
Post: #5
|
|||
|
|||
RE: Mercedes key programmer
Ak500pro, abrtus...
Discount for CarTechnology forum members , 500 000 EVC reseller projects.
You can register on our File Service CLICK HERE FOR FILE SERVICE |
|||
28-07-2014, 17:50 PM,
Post: #6
|
|||
|
|||
RE: Mercedes key programmer
|
|||
07-08-2014, 11:31 AM,
Post: #7
|
|||
|
|||
Mercedes Key program.
Hello guys.
I have read other threads on this topic but i have some doubts and maybe could you advise me. I'm looking for a way to program mercedes keys. i see the (MB key prog 2) but it is very expensive for me and take long to amortize. I have also seen the (AK500) but after seeing several guides on programming system I think is too complicated I think he has too much work to program the key. i have seen the (MB IR PLUS) but I am not clear how this system works to program the keys. someone who understands this issue could give me any advice? Thank you. |
|||
07-08-2014, 14:17 PM,
Post: #8
|
|||
|
|||
RE: Mercedes Key program.
(07-08-2014, 11:31 AM)juanortega Wrote: Hello guys. AK500+ do the job . The correct tuning always is cheaper than a cheap tuning !!!!!!
|
|||
07-08-2014, 16:51 PM,
Post: #9
|
|||
|
|||
RE: Mercedes Key program.
(07-08-2014, 14:17 PM)kostasics Wrote:Yes,with the SKC calculator you dont have to remove all ECUs,only the EZS.(07-08-2014, 11:31 AM)juanortega Wrote: Hello guys. |
|||
08-08-2014, 05:40 AM,
Post: #10
|
|||
|
|||
RE: Mercedes Key program.
(07-08-2014, 16:51 PM)bawareca Wrote:(07-08-2014, 14:17 PM)kostasics Wrote:Yes,with the SKC calculator you dont have to remove all ECUs,only the EZS.(07-08-2014, 11:31 AM)juanortega Wrote: Hello guys. all right. thank you very much for the answers. I have one last question please. using the AK500 + and SKC calculator I have to disassemble the EZS but I have to do the same process with EZS? I have to remove the two chips? and after welding? thanks again |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content