ATTENTION !! Users which have not any posts were deleted !
  1. New Emulator

  2. Julie Emulator

  3. Immo Bypass

  4. AUTO CHIPS

  5. HEXPROG

  6. moe diatronik



F20 Retrofit used Kombi2
22-06-2018, 06:11 AM,
Post: #1
XZBMW  F20 Retrofit used Kombi2
Hi,

I'm retrofitting a 6WA Gen3.1 Kombi2 for F20, however I couldn't find the eeprom 35160WT on the backside of the circuit board. Is there anyone knows if the EEPROM is on the front side (the needle side)? The new Kombi2 has a different needle structure that I'm not able to remove them fearing those needles would break easily. Is there anyone knows how to remove the needles if I have to access the front side?

[Image: 2VmcHRq.jpg]

[Image: a218ek5.jpg]

[Image: XVtyeSG.jpg]

[Image: 6xAUrd2.jpg]

Am I missing something here in the yellowish-white connector?

[Image: 5qadNQA.jpg]
Quote this message in a reply
[-] The following 1 user says Thank You to hkgans for this post:
  • gongaho
22-06-2018, 06:30 AM,
Post: #2
RE: F20 Retrofit used Kombi2
lift needles and look and this side of pcb
Quote this message in a reply
22-06-2018, 07:09 AM,
Post: #3
RE: F20 Retrofit used Kombi2
(22-06-2018, 06:30 AM)Chriz Wrote:  lift needles and look and this side of pcb

But how to safely remove needles? I was using the technique to remove needles of previous generation 6WA, but I almost broke one of the needle at the coin shape circle plastic at the center, still couldn't 'lift' it. fail
Quote this message in a reply
22-06-2018, 08:29 AM,
Post: #4
RE: F20 Retrofit used Kombi2
I made this retrofit with a brand new Kombi2 (no need to flash the eeprom), but you will see that this Kombi empedes the car to sleep. The Kombi2 is not compatible with old FEM generation.
Quote this message in a reply
22-06-2018, 08:37 AM,
Post: #5
RE: F20 Retrofit used Kombi2
Do not have 351650WT its 35128WT and if it is used you'll need the Enigma to change the vin on the eprom its do only one that can you do it ?
Quote this message in a reply
24-06-2018, 07:51 AM,
Post: #6
RE: F20 Retrofit used Kombi2
Yes, you need to lift them. And you will get 35128 eeprom, you will need other then r270 programmer for it. When i did it, i broke one gaudge and fixed it with glue after all.

Kombi2 normally works with old FEM 2012 year f20 car.
Quote this message in a reply
25-06-2018, 02:58 AM, (This post was last modified: 25-06-2018, 03:01 AM by hkgans.)
Post: #7
RE: F20 Retrofit used Kombi2
(22-06-2018, 08:29 AM)smilo Wrote:  I made this retrofit with a brand new Kombi2 (no need to flash the eeprom), but you will see that this Kombi empedes the car to sleep. The Kombi2 is not compatible with old FEM generation.

Did you update the entire car to the same i-level as the Kombi2? I have friends with 2012 F20 car that are using this kombi2. They don't have any problem.

(24-06-2018, 07:51 AM)CEBEP Wrote:  Yes, you need to lift them. And you will get 35128 eeprom, you will need other then r270 programmer for it. When i did it, i broke one gaudge and fixed it with glue after all.

Kombi2 normally works with old FEM 2012 year f20 car.

How did you remove those needles? The soft plastic 'cover' at the centre is very flimsy and I had broken part of it already.

Are you using 35128wt emulator? I searched the web and found some vendors that are selling 35128wt emulators and one of the claimed their emulator can be programmed using ordinary programmer but I have yet to ask if R270 can do or not.
Quote this message in a reply
25-06-2018, 07:15 AM, (This post was last modified: 25-06-2018, 07:24 AM by hkgans.)
Post: #8
HLada  RE: F20 Retrofit used Kombi2
Finally removed needles with some brutal force and using a sharper tool.

[Image: rhQQf2j.jpg]

And removed all 3 needles:

[Image: mXFXGIA.jpg]

After flipping up 2 more connectors of LCD and cruise control indicator the entire PCB can be released.

I can confirm that the EEPROM is 35128WT instead of 35160WT so my R270 didn't work on it.

[Image: jRUBE3A.jpg]

Need to find a way to write my VIN. Is there any 'cheaper' tool similar to R270 that can deal with?
Quote this message in a reply
25-06-2018, 07:21 AM,
Post: #9
RE: F20 Retrofit used Kombi2
Hello!

You can use a Diagprog MK2 USB. it can read out 35128WT and also the needed emulator (also from Diagprog).

CU Oliver
Quote this message in a reply
[-] The following 3 users say Thank You to milkyway for this post:
  • hkgans, hkgans, hkgans
25-06-2018, 07:25 AM,
Post: #10
RE: F20 Retrofit used Kombi2
(25-06-2018, 07:21 AM)milkyway Wrote:  Hello!

You can use a Diagprog MK2 USB. it can read out 35128WT and also the needed emulator (also from Diagprog).

CU Oliver

Thanks, I will take a look.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW F30 6WB retrofit help. jeffijaffa 3 232 15-09-2020, 16:01 PM
Last Post: Jalami
  Need to retrofit Latest Widescreen Command online system for a Mercedes W213 Speed2134 0 411 09-08-2020, 13:00 PM
Last Post: Speed2134
XZBMW Bmw f20 - 6wa retrofit ivannw 13 8,155 20-06-2020, 20:56 PM
Last Post: Vojno
XZBMW BMW E60 CIC RETROFIT original nob is fast. 2004 545i emailmax 0 268 12-05-2020, 09:30 AM
Last Post: emailmax
ZSkoda Skoda Octavia 3 2014 retrofit Virtual cocpit maros4341 5 1,619 30-03-2020, 20:33 PM
Last Post: plier
XZBMW BMW F07 6WA retrofit problem Knowme2k 4 705 20-01-2020, 12:11 PM
Last Post: Knowme2k
XZBMW BMW F30 6WB retrofit Knowme2k 3 1,468 16-01-2020, 22:27 PM
Last Post: filippin87
  BMW F10 6WA Retrofit dead after Flash UNKN ExiizZ 2 555 09-01-2020, 04:16 AM
Last Post: lustek
  Virgin F20 6WA KOMBI2 35128 dump ElBarto 9 2,897 02-12-2019, 16:47 PM
Last Post: pepi
  Need help with kombi2 f20 m35i 1 1,213 30-11-2019, 15:11 PM
Last Post: m35i

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content