Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ISTA-P bricked DME
23-06-2018, 06:14 AM,
Post: #1
XZBMW  ISTA-P bricked DME
Hi,
I tried to update the DME with ISTA-P and this bricked it.
Now the DME is left with programming status 15.
What has gone wrong?
Attached is the ISTA-P report.


Attached Files
e87.pdf
File Type: .pdf
Downloaded: 80 times
Size: 273.3 KB

Quote this message in a reply
23-06-2018, 06:24 AM,
Post: #2
RE: ISTA-P bricked DME
Reset battery “Disconnect negative battery cable” for 30 minutes, and reprogram the DME.
Quote this message in a reply
23-06-2018, 06:37 AM,
Post: #3
RE: ISTA-P bricked DME
And let us know if you get it running again!

Don't forget to press [Image: thanks.gif] and [Image: postbit_reputation.gif], if my post helped you.
Visit this user's website
Quote this message in a reply
23-06-2018, 17:06 PM,
Post: #4
RE: ISTA-P bricked DME
Reset natery helped ? Please let us know
Quote this message in a reply
23-06-2018, 17:12 PM,
Post: #5
RE: ISTA-P bricked DME
you have winkfp if yes send me PM
Quote this message in a reply
24-06-2018, 00:54 AM,
Post: #6
RE: ISTA-P bricked DME
(23-06-2018, 06:14 AM)lagunasec Wrote:  Hi,
I tried to update the DME with ISTA-P and this bricked it.
Now the DME is left with programming status 15.
What has gone wrong?
Attached is the ISTA-P report.

What tool did you use?
Quote this message in a reply
24-06-2018, 05:02 AM,
Post: #7
RE: ISTA-P bricked DME
Thanks for your inputs.
On second attempt, ISTA-P was unable to identify the DME, so the programming was impossible.
Tried winkfp in comfort mode, not working.
I sent the DME to a local tunner but was impossible to recover via BDM, the flash is damaged.
I eventually bought an used DME and the tuning specialist fixed it for me.
I am interested if someone knows what damaged the DME in the first place (maybe from ista-p report), in order to avoid this from happening in the future.
The tools used were original icom next and 100A power source.
Quote this message in a reply
24-06-2018, 13:17 PM,
Post: #8
RE: ISTA-P bricked DME
was the DME still visible in diagnostic (INPA/ISTA/ tool32)
if yes, should be possible to recover in winkfp expert mode!
Quote this message in a reply
24-06-2018, 13:38 PM,
Post: #9
RE: ISTA-P bricked DME
Why were you updating the DME? If it had an internal fault code it was junk anyways. Depending on your model of vehicle they do get water damaged often from people leaving the plastic cowling off.
Quote this message in a reply
24-06-2018, 19:56 PM,
Post: #10
RE: ISTA-P bricked DME
(24-06-2018, 05:02 AM)lagunasec Wrote:  I am interested if someone knows what damaged the DME in the first place (maybe from ista-p report), in order to avoid this from happening in the future. The tools used were original icom next and 100A power source.

I think Intel flash data erase was the problem or not good working.
As you can see in the log erasing the flash made a problem.
The Intel chip has write protectec areas, may be the power source made a voltage shift or spikes. What kind of charger was it?

Erasing and writing of a flash is always a voltage critical process.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  ista 4.46 Standalone kiranabc 28 2,707 21 minutes ago
Last Post: edtech
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 257 3 hours ago
Last Post: RaoulK1998
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,242 Yesterday, 20:02 PM
Last Post: Node
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,646 626,531 Yesterday, 16:29 PM
Last Post: Sedoy
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,404 Yesterday, 10:39 AM
Last Post: MINIGP1610
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 117 26-03-2024, 12:09 PM
Last Post: hlip
  ISTA launcher problem Red_bean_bun 1 154 26-03-2024, 05:11 AM
Last Post: 2013m5
XZBMW Adding a new vehicle/model to "Reingold" ISTA+ dieselweasel 12 659 25-03-2024, 08:11 AM
Last Post: Node
XZBMW Ultimate Ediabas/ISTA+ voltage control V3 Node 322 121,413 24-03-2024, 23:45 PM
Last Post: armenh7
  REQUEST ista 4.45.21 the ISTAGUI.exe file ddsx 5 322 24-03-2024, 14:15 PM
Last Post: Mathijshee

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content