Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

TV Module Flash Failed
23-06-2018, 16:10 PM,
Post: #1
XZBMW  TV Module Flash Failed
Hi guys,

Wonder if anyone could assist, I retrofitted TV in my f15 & wanted to update the module, it calculated the TAL & I used HWID from ECU to calculate, BTLDR & SWFL went fine but it failed on injecting the CAFD, I can talk to it with Tool32 but no matter what istep I use I cannot get it to find a different BTLDR or SWFL that will let me code it, below is the error when trying to code.

Caf's suchen
Tal wird generiert
Abarbeitung wird gestartet

TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
ExecutionID=2018/06/23-17:09:19.001
[] prepareTALExecution started
[] prepareTALExecution finished
[] prepareVehicleForCoding started
[] prepareVehicleForCoding finished
[TV_MODUL - 4B] prepareECUforCoding started
MCDDiagService<id=230618, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforCoding, service=DSC - DiagnosticSessionControl, description=error: negative response : subFunctionNotSupported, link=TV_MODUL_4B_ETHERNET>
[TV_MODUL - 4B] prepareECUforCoding error
[TV_MODUL - 4B] There was an error during TAL execution, please check the log files.
[TV_MODUL - 4B] - [Exception - TV_MODUL - 4b] Exception occurred: job failed with negative response error:
code: service returned global negative response
description: Service DSC returned a negative response with response code subFunctionNotSupported; LinkName: TV_MODUL_4B_ETHERNET
severity: ERROR

Timestamp: Sat Jun 23 17:09:27 BST 2018
ErrorCategory: VEHICLE_ERROR ID: 433
Class: com.bmw.psdz.vehicle.connection.util.ResultUtil
ExecutionContext={category=TAL, ecuid=(TV_MODUL,0x4b), TA_CATEGORY=cdDeploy, PROGRAMMING_STATUS=prepareECUforCoding,PSdZEvent={message=MCDDiagService<id=230618, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforCoding, service=DSC - DiagnosticSessionControl, description=error: negative response : subFunctionNotSupported, link=TV_MODUL_4B_ETHERNET>, timestamp=Sat Jun 23 17:09:27 BST 2018, package name=com.bmw.prodias.execution.primitives.mcd, class name=SingleEcuJob, text id=MCD_EVENT_ID__JOB__SERVICE__DESCRIPTION__LINK__, event id=default, event type=DiagService error, ECUId:TV_MODUL_0x4B}}
[TV_MODUL - 4B] finalizeECUCoding started
[TV_MODUL - 4B] finalizeECUCoding finished
[] finalizeVehicleCoding started
[] finalizeVehicleCoding finished
[] finalizeTALExecution started
[] finalizeTALExecution finished
TAL execution finished
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "11s". [C206]
Abarbeitung beendet
Quote this message in a reply
23-06-2018, 20:06 PM, (This post was last modified: 23-06-2018, 21:26 PM by Clusters.)
Post: #2
RE: TV Module Flash Failed
Read errors with ISTA+, check if TV module is red on control unit tree.

BMW Coding Programming Retrofitting
Mercedes Benz Coding Retrofitting
Online help by TeamViewer
CID Changeable SD cards! 100% working!
Quote this message in a reply
23-06-2018, 21:23 PM, (This post was last modified: 23-06-2018, 21:37 PM by mcrussell.)
Post: #3
RE: TV Module Flash Failed
It is red on the tree but I can see it in esys & tool32

apiJob("TVM2_T2","svk_lesen","","")

Satz : 0
OBJECT = tvm2_t2
SAETZE = 4
JOBNAME = svk_lesen
VARIANTE = TVM2_T2
JOBSTATUS =
UBATTCURRENT = -1
UBATTHISTORY = -1
IGNITIONCURRENT = -1
IGNITIONHISTORY = -1
Satz : 1
PROG_TEST = 1 00 01 ..
PROZESSKLASSE_WERT = 1 00 01 ..
PROZESSKLASSE_TEXT = Hardware (Elektronik)
PROZESSKLASSE_KURZTEXT = HWEL
SGBM_IDENTIFIER = 00002AA1
VERSION = 003.000.000
SGBM_ID = HWEL-00002AA1-003.000.000
Satz : 2
PROZESSKLASSE_WERT = 6 00 06 ..
PROZESSKLASSE_TEXT = Bootloader
PROZESSKLASSE_KURZTEXT = BTLD
SGBM_IDENTIFIER = 000030B1
VERSION = 001.000.017
SGBM_ID = BTLD-000030B1-001.000.017
Satz : 3
PROZESSKLASSE_WERT = 8 00 08 ..
PROZESSKLASSE_TEXT = Software ECU Speicherimage
PROZESSKLASSE_KURZTEXT = SWFL
SGBM_IDENTIFIER = 000030B2
VERSION = 006.000.011
SGBM_ID = SWFL-000030B2-006.000.011
Satz : 4
ANZAHL_EINHEITEN = 3 00 03 ..
PROG_DATUM = 22.06.18
PROG_KM = 0 00 00 00 00 ....
JOB_STATUS = OKAY
_REQUEST = 3 Bytes
0000 : 22 F1 01 "ñ.
_RESPONSE = 44 Bytes
0000 : 62 F1 01 01 01 00 03 18 06 22 8F 04 D2 01 00 00 bñ...... .".Ò...
0010 : 10 00 00 00 01 00 00 2A A1 03 00 00 06 00 00 30 .......* ¡......0
0020 : B1 01 00 11 08 00 00 30 B2 06 00 0B ±......0 ²...

this is the error when i attempt to code it:

Caf's suchen
Tal wird generiert
Abarbeitung wird gestartet

TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
ExecutionID=2018/06/23-22:36:20.123
[] prepareTALExecution started
[] prepareTALExecution finished
[] prepareVehicleForCoding started
[] prepareVehicleForCoding finished
[TV_MODUL - 4B] prepareECUforCoding started
MCDDiagService<id=230618, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforCoding, service=DSC - DiagnosticSessionControl, description=error: negative response : subFunctionNotSupported, link=TV_MODUL_4B_ETHERNET>
[TV_MODUL - 4B] prepareECUforCoding error
[TV_MODUL - 4B] There was an error during TAL execution, please check the log files.
[TV_MODUL - 4B] - [Exception - TV_MODUL - 4b] Exception occurred: job failed with negative response error:
code: service returned global negative response
description: Service DSC returned a negative response with response code subFunctionNotSupported; LinkName: TV_MODUL_4B_ETHERNET
severity: ERROR

Timestamp: Sat Jun 23 22:36:28 BST 2018
ErrorCategory: VEHICLE_ERROR ID: 433
Class: com.bmw.psdz.vehicle.connection.util.ResultUtil
ExecutionContext={category=TAL, ecuid=(TV_MODUL,0x4b), TA_CATEGORY=cdDeploy, PROGRAMMING_STATUS=prepareECUforCoding,PSdZEvent={message=MCDDiagService<id=230618, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforCoding, service=DSC - DiagnosticSessionControl, description=error: negative response : subFunctionNotSupported, link=TV_MODUL_4B_ETHERNET>, timestamp=Sat Jun 23 22:36:28 BST 2018, package name=com.bmw.prodias.execution.primitives.mcd, class name=SingleEcuJob, text id=MCD_EVENT_ID__JOB__SERVICE__DESCRIPTION__LINK__, event id=default, event type=DiagService error, ECUId:TV_MODUL_0x4B}}
[TV_MODUL - 4B] finalizeECUCoding started
[TV_MODUL - 4B] finalizeECUCoding finished
[] finalizeVehicleCoding started
[] finalizeVehicleCoding finished
[] finalizeTALExecution started
[] finalizeTALExecution finished
TAL execution finished
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "11s". [C206]
Abarbeitung beendet


Attached Files Thumbnail(s)
   
Quote this message in a reply
23-06-2018, 22:36 PM, (This post was last modified: 23-06-2018, 22:39 PM by mcrussell.)
Post: #4
RE: TV Module Flash Failed
This is the TAL based on my FA F025-14-11-506 with $601 & HO Word TVT2, also after clicking HW ID from SVT


Attached Files Thumbnail(s)
       
Quote this message in a reply
24-06-2018, 08:19 AM, (This post was last modified: 24-06-2018, 08:19 AM by milkyway.)
Post: #5
RE: TV Module Flash Failed
Hello!

You cannot change the Bootloader in this way. Just create your own TAL with an update of btl, Swfl, FLSL and CAFD based on the existing files in the ECU.

CU Oliver
Quote this message in a reply
24-06-2018, 08:39 AM, (This post was last modified: 24-06-2018, 08:59 AM by mcrussell.)
Post: #6
RE: TV Module Flash Failed
Thanks for the reply, I’m not sure whether those files are correct though as the first update I did I forgot to save the SVT_IST so I’m not sure they are correct.
Is there a way to determine the correct files required from the label?

I don’t think there where any flsl files in there originally either, what do they do?
Quote this message in a reply
24-06-2018, 10:02 AM, (This post was last modified: 24-06-2018, 10:03 AM by mcrussell.)
Post: #7
RE: TV Module Flash Failed
Just flashed again with original TAL but still doesn't accepted CAFD


Attached Files
TVM Flash.txt
File Type: .txt
Downloaded: 18 times
Size: 44.03 KB

Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  CCC flash WINKFP ICOM BimmerSLO 4 40 51 minutes ago
Last Post: BimmerSLO
XZBMW Manual : How to Flash Any NBTevo ID4 to ID5 or ID6 ECE/US/ASIA FSCmap 183 51,642 25-03-2024, 18:58 PM
Last Post: DayvG
XZBMW E84 X1 25d with 8hp45x how to flash Alp*na or other EGS hasn38 0 86 23-03-2024, 00:26 AM
Last Post: hasn38
  mini r50 dashboard 3K91D pinout, dash bricked, i need flash and eeprom matiz 10 1,464 22-03-2024, 11:47 AM
Last Post: urgi
  Entrynav2 FI failed to install FSC pack Pedrom92 7 358 06-03-2024, 22:18 PM
Last Post: Billyjoe69
XZBMW ISTA D - identification possible, unable to get status of each module thedafeet 6 242 04-03-2024, 15:25 PM
Last Post: thedafeet
XZBMW DKOMBI2 G12 FLASH DUMP sebastianfernandes 2 230 03-03-2024, 06:46 AM
Last Post: sebastianfernandes
XZBMW BMW G8x M3/M4 CSL EGS flash weby 21 3,213 01-03-2024, 10:20 AM
Last Post: TRLK
  F15 Hybrid failed battery pack? willisodhiambo 0 101 26-02-2024, 08:08 AM
Last Post: willisodhiambo
XZBMW Resetting a short circuit fault in a FRM module TIGHTFIN 10 1,146 24-02-2024, 22:29 PM
Last Post: vierchatura

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content