Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Ncsexpert read fine VIN but no getcode ?
28-06-2018, 17:38 PM,
Post: #1
|
|||
|
|||
ncsexpert read fine VIN but no getcode ?
hi friends
i have doubt about remove $524 from VO in E70 ncsexpert read fine VIN but after puch back to check "get code" i have error ( check my screen ) from ncsexpert if i test with INPA to read CAS i have error ( check my screen from INPA ) i think i need upload my INPA or :dunno: I have daten 60.1 but error say my SGBD version 17.014 and mine SGBD is version 12.000 so how solve this trouble , anybody have idea ? |
|||
28-06-2018, 20:49 PM,
Post: #2
|
|||
|
|||
RE: Ncsexpert read fine VIN but no getcode ?
When I experience issues like this, I wipe out my standard tools and start over with a fresh install. I have found that the update tools like BMW Coding Tool sometimes corrupts the installation and creates issues like this when updating to a newer DATEN.
|
|||
28-06-2018, 21:09 PM,
Post: #3
|
|||
|
|||
RE: Ncsexpert read fine VIN but no getcode ?
all days from one week i install and remove ncsexpert inpa ediabass to have comunication with car
i update daten using total commander and it never failed so i doubt daten corrupted i will check other way thanks for your help |
|||
28-06-2018, 22:47 PM,
Post: #4
|
|||
|
|||
RE: Ncsexpert read fine VIN but no getcode ?
error from ncsexpert about .man solved
but about inpa version i think i need update my daten 60.1 anybody know anything about it ? thanks |
|||
28-06-2018, 23:33 PM,
Post: #5
|
|||
|
|||
RE: Ncsexpert read fine VIN but no getcode ?
The Bimmergeeks download is very good (and free). It is quite up to date, and works perfectly with zero modifications. I doubt you need the latest Datens for standard tools, since BMW is done with E-chassis updates as of 11/2016.
|
|||
29-06-2018, 06:02 AM,
Post: #6
|
|||
|
|||
RE: Ncsexpert read fine VIN but no getcode ?
(28-06-2018, 23:33 PM)RocketSurgeon Wrote: The Bimmergeeks download is very good (and free). It is quite up to date, and works perfectly with zero modifications. I doubt you need the latest Datens for standard tools, since BMW is done with E-chassis updates as of 11/2016. Correct! That .man error must be because his man file was not empty. Been there done that |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content