Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Peugeot 508 Airbag ECU/ Module Location and reset
05-07-2018, 18:40 PM,
Post: #1
Peugeot 508 Airbag ECU/ Module Location and reset
Hi,

I have a 2013 Peugeot 508 showing the following faults:


B140A - of the fired Pretensioners
B1415 - Detection of rear impact
B0072 - Passengers pretension line fault
B0070 - Drivers Pretensioner fault

Just wondering if resetting the module would remove the codes and where the module is located.

Any help is appreciated

Thanks
Quote this message in a reply
05-07-2018, 19:41 PM,
Post: #2
RE: Peugeot 508 Airbag ECU/ Module Location and reset
hi
1/ you need a clear the airbag ecu from crash data
2/ chaaenge the bad elemnt
3/you get the system without fault


Attached Files
airbag.txt
File Type: .txt
Downloaded: 36 times
Size: 46 bytes

Quote this message in a reply
05-07-2018, 20:51 PM,
Post: #3
RE: Peugeot 508 Airbag ECU/ Module Location and reset
(05-07-2018, 19:41 PM)CHIKODIAG Wrote:  hi
1/ you need a clear the airbag ecu from crash data
2/ chaaenge the bad elemnt
3/you get the system without fault

Hi,

thank you for that information. if I read the crash data from the module using carprog can I write it via carprog also? can I post dump here for someone to clear the data? thanks
Quote this message in a reply
05-07-2018, 21:41 PM,
Post: #4
RE: Peugeot 508 Airbag ECU/ Module Location and reset
hi
i dont know aubot carprog if you have a good clone i think it will do it
for the clear yes read and post here and you will get the help
good luck
Quote this message in a reply
06-07-2018, 06:35 AM,
Post: #5
RE: Peugeot 508 Airbag ECU/ Module Location and reset
(05-07-2018, 21:41 PM)CHIKODIAG Wrote:  hi
i dont know aubot carprog if you have a good clone i think it will do it
for the clear yes read and post here and you will get the help
good luck

Thank you. Can I read direct from board or do I need to desolder then read?

Thanks
Quote this message in a reply
06-07-2018, 14:11 PM,
Post: #6
RE: Peugeot 508 Airbag ECU/ Module Location and reset
hi
the beter is desolder then read to get a good data read
good luck
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
PPeugeot PEUGEOT 9817062880 BOSCH Clear crash vesko_hard 2 28 Yesterday, 16:41 PM
Last Post: BmwMerc
  Peugeot 308 airbag crash clear bambi79 2 25 Yesterday, 14:02 PM
Last Post: bambi79
ZVW Airbag module problem Need help! BMWFXX 2 79 25-03-2024, 19:49 PM
Last Post: BMWFXX
ZTAudi 8w0959655g reset or change for Audi A4 B9 uh60 5 120 23-03-2024, 20:51 PM
Last Post: uh60
  Need Pinout help for VVDIPROG Renault 985109244R Airbag Ecu Dealirio 2 78 23-03-2024, 12:33 PM
Last Post: danocar
  DACIA DUSTER airbag reset enzoscod 1 48 21-03-2024, 23:07 PM
Last Post: volavka
KOpel AIRBAG OPEL INSIGNIA A 13578322 dunka100 1 62 20-03-2024, 06:48 AM
Last Post: danocar
  C5 x7 2008 airbag clear meszol 7 113 19-03-2024, 00:34 AM
Last Post: Nkhchyk
  Dodge Ram crash and lock reset kari 1 64 19-03-2024, 00:24 AM
Last Post: Nkhchyk
  Renault Megane 2 - 2003 , airbag wired scheme for you Yhoni 0 39 13-03-2024, 19:46 PM
Last Post: Yhoni

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content