Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Peugeot 307 Hdi 2003 Airbag Crash Data Reset
05-07-2018, 19:07 PM,
Post: #1
|
|||
|
|||
Peugeot 307 Hdi 2003 Airbag Crash Data Reset
Hello everyone,
I have a 2003 Peugeot 1.4 Hdi, if I were to send you eeprom crash data could you clear and send it to me again? Thanks in advance. |
|||
05-07-2018, 19:35 PM,
Post: #2
|
|||
|
|||
RE: Peugeot 307 Hdi 2003 Airbag Crash Data Reset
HI
if you read and post your file we can clear it for you yes good luck |
|||
05-07-2018, 19:47 PM,
Post: #3
|
|||
|
|||
RE: Peugeot 307 Hdi 2003 Airbag Crash Data Reset
(05-07-2018, 19:35 PM)CHIKODIAG Wrote: HIThank you for the reply. I have just downloaded Airbag Tool program from here, but I do not know where to start. How I establish the connection between airbag module and the program. I can unsolder the Eeprom if needed, but I do not know how to connect it to my computer. Do I need special tools for the connection, I can make electical circuits if needed. |
|||
05-07-2018, 20:12 PM,
Post: #4
|
|||
|
|||
RE: Peugeot 307 Hdi 2003 Airbag Crash Data Reset
HI
what programer you have to read the eprom ? |
|||
05-07-2018, 20:30 PM,
Post: #5
|
|||
|
|||
RE: Peugeot 307 Hdi 2003 Airbag Crash Data Reset
(05-07-2018, 20:12 PM)CHIKODIAG Wrote: HI I do not have any program yet, I have found an instruction to read the data but it is for toyota. I do not know whether it works on my car's eeprom. Here is the instruction http://www.instructables.com/id/DIY-Rese...rash-Data/ If it is not possible via this instruction, could you advise me to find an affordable way to read eeprom data. |
|||
05-07-2018, 21:32 PM,
Post: #6
|
|||
|
|||
RE: Peugeot 307 Hdi 2003 Airbag Crash Data Reset
HI it work like that
1/finde/ open/ desolder the eprom (if mcu you need the jtag or bdm conection) 2/use a programer x-prog / beeprog/ mineprog /carprog or............ 3/read the chip with the programer and save the file 4/start your clear program (airbag tool ) open the file you have read ant select the information in your soft HW/SW part n car brond ........ and click clear whene it is done save the new file 5/warit the clear to the chip i hop you get the idia good luck |
|||
06-07-2018, 16:47 PM,
Post: #7
|
|||
|
|||
RE: Peugeot 307 Hdi 2003 Airbag Crash Data Reset
(05-07-2018, 21:32 PM)CHIKODIAG Wrote: HI it work like thatThank you for clear explanation I completely get the idea but I have a quick question. Do we have to desolder the eeprom to reset crash data ? or do we have another way? |
|||
06-07-2018, 17:12 PM,
Post: #8
|
|||
|
|||
RE: Peugeot 307 Hdi 2003 Airbag Crash Data Reset
hi
the beter is desolder then read to get a good data read good luck |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content