[marcink821]

why you want updated all ? not worth it is not safe but if you want... i help you...

[Bimmer540]

I dont have MOST interface. And i dont have ICOM.

So it is not safe with KDCAN?

I can pay a dealer 200 euro for it?
is it worth it?

Yes.

[MahoC]

hi marcink821

My friend told me that my car will run smoother and be more economic? That is the only reason.
The car run great, but if it can get smoother, why not upgrade?

How can you help me?

---

I just downloade SP DATEN v60.

[marcink821]

update only DDE, synchronize after updating DDE with EWS

[MahoC]

synchronize after updating DDE with EWS???

I dont know What thats meen?

[targa9]

If you want the car to drive better it's just the DDE and EGS (gearbox) that need updating.

With a DCAN cable the CCC alone will take 10-12 hours. The whole car could take 20 hours. If there's a power glitch or communication problem then you can completely corrupt whatever was being programmed at the time.

What is key if you do this is to have a Power Supply connected to the car providing at least 14V ideally 14.5V and capable of sourcing at least 40A, ideally 70A.

[MahoC]

Hi Targa

Thanks you for the ansvar.
If i only update the DDE and EGS. How Long would it take?

[Rawediag]

Less than an hour.

[MahoC]

Hi Rawediag

less than a hour?
Then i dont need to Power Supply?

[Rawediag]

Hi, it is possible if you have good battery, but i recommend at least 10A charger. I am using Maas SPS-50-II power supply, which is cheap and can do 50Amps.