[egamaster]

HI
I have a mini cooper 2007 came in for spare key ,i followed procedure with vvdi 2 to add key so i flaShed the cas everythings was ok so far added dealer key ,wich was successful,but the car will not star and ignition won't come on (just airbag and esl light)
both remotes central works and steering is blocked in unlock position
when i do esl cas sync nothing change
and i got 2 dtc A0AA and A0AB and in steering lock unit i got this dtc : there is no input signal coming from the cas

NEED FLASH FOR MINI CAS3++ ISTPA
cas ID :9389115
cas3++(ISTPA)
MSV/FSV/OSV : 0.0.0/2.8.0/3.3.0
HW/COD.INDEX C4/09
DIAG.INDEX 06A0

REGARDS

[raffy haddad]

hello no need for flash
a collegue of mine has same problem with mini 2011 today
so we bring tha cas out and read eeprom and flash and make key with dump read by vvdi prog and everything went ok car start
same problem had remote working but no start no key display on dash
regards good luck
edit
if you took out cas and read
read eeprom and flash and it will be nice to share with us
regards