[eliaskok]

Hi,

I have a SEAT ibiza 2017 1.0 TSI that had a front end damage and the airbags deployed.

Everything is fixed now (front end, airbags etc.) but the steering wheel is really heavy and i get fault P160900. Anyone knows if i can clean this fault so the electromechanical steering wheel works again as it should? Also will it be possible to do this with wow-snooper (wurth)?

Thank you.

[Ashraf6119]

18017/P1609/005641 - Crash Shut-Down Activated
Possible Symptoms
Fault Code cannot be cleared

Possible Causes
Crash Signal activated (i.e. Accident with Airbag Deployment)

Possible Solutions
Set Readiness, the Fault Code should be cleared automatically during this Process.

Special Notes
In case of an Accident the Airbag Control Module sends a Crash Signal which orders the Engine Control Module to stop the Engine. In Addition this Fault Code will be stored. The Engine may be restarted after cycling the Ignition, the Fault Code should not have any further Influence.

When this DTC is found in a EPS_TRW_ALow 44-Steering Assist module registered users can:
Follow the instructions located in this thread] and post any questions related to the vehicle there.
Email the complete Auto-Scan with the repair history.

Hope this helps for more info look in the below link..........



http://wiki.ross-tech.com/wiki/index.php...609/005641

[eliaskok]

18017/P1609/005641 - Crash Shut-Down Activated
Possible Symptoms
Fault Code cannot be cleared

Possible Causes
Crash Signal activated (i.e. Accident with Airbag Deployment)

Possible Solutions
Set Readiness, the Fault Code should be cleared automatically during this Process.

Special Notes
In case of an Accident the Airbag Control Module sends a Crash Signal which orders the Engine Control Module to stop the Engine. In Addition this Fault Code will be stored. The Engine may be restarted after cycling the Ignition, the Fault Code should not have any further Influence.

When this DTC is found in a EPS_TRW_ALow 44-Steering Assist module registered users can:
Follow the instructions located in this thread] and post any questions related to the vehicle there.
Email the complete Auto-Scan with the repair history.

Hope this helps for more info look in the below link..........



http://wiki.ross-tech.com/wiki/index.php...609/005641

So i assume that the only solution here is with VCDS or ODIS?

[Ashraf6119]

Yes.

[eliaskok]

Yes.

Okay, thank you very much for letting me know.

Much appreciated.

[M83]

How can I do with odis? asks me for a pass?

[Provag]

How can I do with odis? asks me for a pass?

u r attempting an online connection this is why he is asking for password.