[buzzy]

Hello to everyone.
Have F20 07/15 with navi business. Retrofitted NBT EVO from G30 (03/17 - id6). Screen from F20 (id5), no touch-box installed. Full FSC retrofit pack bought from fscmap.
After first launch with original FA and option 609 instead 606 - NO SIGNAL. Coded with 0717 date, system started with grey navi. Script works as system reboots itself second time. Can import 170 code within first 30 seconds after reboot and it accepted. One minute later all certs are cancelled and navi grey again.
Can code with different date - 0317 gives id5, but situation the same.
In ISTA - Component Protection is active, but!! everything works except NAVI for few days. Today I tried to connect screen from G30 - Component protection works as it should be - black screen all the time, put screen from F20 back, everything works except NAVI.
P.S. tried to Flash NBT few times. Tried to code with FA from G30 (except VIN).
I stacked with it

[psya]

I think the 170 FSC does not have to be active...on all nbt evo units i installed i have never got a FSC 170 Active.

Try deleting FSC.s with Tool32....reset unit...add fsc 170 first, after all other fsc
i think you are having a fsc problem
i could have a look via TV if you really cant get it working.

[bmwcoder75]

Delete persistency and import FSC again
BIN should do that for you
If not ask fscmap why their BIN file does not clean CP

---

I think the 170 FSC does not have to be active...on all nbt evo units i installed i have never got a FSC 170 Active.

Try deleting FSC.s with Tool32....reset unit...add fsc 170 first, after all other fsc
i think you are having a fsc problem
i could have a look via TV if you really cant get it working.

Can't delete FSC with tool32 on id5/id6 since last while now..

[psya]

Delete persistency and import FSC again
BIN should do that for you
If not ask fscmap why their BIN file does not clean CP

---

I think the 170 FSC does not have to be active...on all nbt evo units i installed i have never got a FSC 170 Active.

Try deleting FSC.s with Tool32....reset unit...add fsc 170 first, after all other fsc
i think you are having a fsc problem
i could have a look via TV if you really cant get it working.

Can't delete FSC with tool32 on id5/id6 since last while now..

Tool32 deletes fsc on ID5 and ID5 very easily....

[smercki]

write the needs VIN to FA file that you will to reprogram the EVO. it is necessary.
After flash:
1. to use BIN file
2. import 170fsc, Expert mode - FSC extended - store FSC, check FSC
3. use BIN again

[buzzy]

write the needs VIN to FA file that you will to reprogram the EVO. it is necessary.
After flash:
1. to use BIN file
2. import 170fsc, Expert mode - FSC extended - store FSC, check FSC
3. use BIN again

The needs VIN is donor car VIN?

[smercki]

write the needs VIN to FA file that you will to reprogram the EVO. it is necessary.
After flash:
1. to use BIN file
2. import 170fsc, Expert mode - FSC extended - store FSC, check FSC
3. use BIN again

The needs VIN is donor car VIN?

no!
Vin by yu car

[bmwcoder75]

Delete persistency and import FSC again
BIN should do that for you
If not ask fscmap why their BIN file does not clean CP

---

I think the 170 FSC does not have to be active...on all nbt evo units i installed i have never got a FSC 170 Active.

Try deleting FSC.s with Tool32....reset unit...add fsc 170 first, after all other fsc
i think you are having a fsc problem
i could have a look via TV if you really cant get it working.

Can't delete FSC with tool32 on id5/id6 since last while now..

Tool32 deletes fsc on ID5 and ID5 very easily....

Sure thing

[alblue]

write the needs VIN to FA file that you will to reprogram the EVO. it is necessary.
After flash:
1. to use BIN file
2. import 170fsc, Expert mode - FSC extended - store FSC, check FSC
3. use BIN again

The needs VIN is donor car VIN?

Did you solve?
I am having the same problem.
If it is resolved, please tell me how to solve it.