Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
PSA LEXIA Reflash to C/ version
14-07-2014, 08:55 AM,
(This post was last modified: 03-06-2015, 07:07 AM by titoun.)
Post: #21
|
|||
|
|||
RE: PSA LEXIA Reflash to C/ version
|
|||
11-08-2014, 21:04 PM,
Post: #22
|
|||
|
|||
RE: PSA LEXIA Reflash to C/ version
Is there any news about flashing C version?
Best regards |
|||
30-05-2015, 16:35 PM,
Post: #23
|
|||
|
|||
RE: PSA LEXIA Reflash to C/ version
I have updated to version C. most surprisingly, done using TeamViewer for 20 seconds . when connected to the Internet. I was in another country , thousands of kilometers away . this is technology !!!
|
|||
30-05-2015, 17:44 PM,
Post: #24
|
|||
|
|||
RE: PSA LEXIA Reflash to C/ version
|
|||
03-06-2015, 05:36 AM,
Post: #25
|
|||
|
|||
RE: PSA LEXIA Reflash to C/ version
I have reflashed mine to rev. C, I am using firmware version 4.2.9 and Diagbox 7.57, but it wont communicate with diesel additive ecu. Any ideas why?
Bangers. |
|||
03-06-2015, 07:17 AM,
Post: #26
|
|||
|
|||
RE: PSA LEXIA Reflash to C/ version
(03-06-2015, 05:36 AM)bangerdemon Wrote: I have reflashed mine to rev. C, I am using firmware version 4.2.9 and Diagbox 7.57, but it wont communicate with diesel additive ecu. Any ideas why? Hi, If your interface is recognized on USB port as "USB com Board EVOLUTION Driver (Multi instance)" and your serial is not blacklisted so.... Your XS EVOLUTION interface has a hardware problem ! Maybe on relay electronic board if your interface communicate with other ECU. Post photos of your electronics board pls, for help you ! Regards |
|||
12-06-2015, 15:04 PM,
Post: #27
|
|||
|
|||
RE: PSA LEXIA Reflash to C/ version
Hi
to change then you should change the Fujitsu Software Update and winbond memory, but once I prepared materials online after a failure is no longer present. In a few days he will prepare again. |
|||
Reputation: +1 - rch11 [+1] | |||
13-06-2015, 22:07 PM,
Post: #28
|
|||
|
|||
RE: PSA LEXIA Reflash to C/ version
(12-06-2015, 15:04 PM)Wogabun Wrote: Hi Note: Diagbox to V7.38 = Firmware 4.3.0 Diagbox from V7.39 = Firmware 4.3.2 and the printed-circuit board has to fit. CIT Rotti |
|||
17-06-2015, 16:38 PM,
Post: #29
|
|||
|
|||
RE: PSA LEXIA Reflash to C/ version
Hi Peeps need to re-flash my interface to version c can anyone help with files and knowledge please.
Thanks Pilsner Does anybody have mr nlc email address ? regards Pilsner |
|||
17-06-2015, 18:52 PM,
Post: #30
|
|||
|
|||
RE: PSA LEXIA Reflash to C/ version
Is it possible to get contact of Mr NLC so i can send him some beers
It is very warm period of year i a thinking that he is thirsty. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content