Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. CarLabImmo

  2. AUTO-CHIPS

  3. Ecu-Service



Yanhua mini ACDP programming tool
19-09-2018, 08:58 AM, (This post was last modified: 19-09-2018, 09:31 AM by sunshine2018.)
Post: #21
RE: Yanhua mini ACDP programming tool
(31-08-2018, 16:22 PM)Chriz Wrote:  But sometimes it’s tricky to place the probes correctly, it’s faster to use other programmer
until you have figured out how to place probes correctly

The newest version (09-19-2018)ACDP with improved CAS3 and CAS4 board fix the problem that it’s difficult to place the probes correctly.

(13-09-2018, 08:32 AM)milkyway Wrote:  For FEM/BDC I use my Autohex II and for eeproms my other stuff like R27, Codiprog USB mk2 and Orange5.

CU Oliver
For FEM/BDC, 3 months ago, it needed FEM electric bridges to complete. Now update Mini ACDP to the newest version, it won't need the electric bridges any more, it is easy to use.
   
Quote this message in a reply
05-02-2019, 02:48 AM,
Post: #22
RE: Yanhua mini ACDP programming tool
I am getting this tool but i have a question

1. Can i use it with PC without a wifi network?
2. Can it be used without internet or that is a necessity
Quote this message in a reply
28-02-2019, 08:32 AM,
Post: #23
RE: Yanhua mini ACDP programming tool
Arrived, set up and ready to go. Wifi a necessity, managed to connect to my PC too.
Quote this message in a reply
02-03-2019, 03:55 AM,
Post: #24
RE: Yanhua mini ACDP programming tool
I have tested the tool
1. Seems easy to fix CAS bridge. Read two CAS3+ 0L15Y. OK.
2. Attempted to make key all keys lost by ISN but key does not work. Tried by 64 attempt method but that process has a flow. At no point does it ask to write dump back to CAS though it needs CAS installed back to car. All this on bench so ill play some more
3. Key frequency detection does not work for me. Following up with support.

Its a lovely tool if it could improve on its weaknesses. I use PC exclusively.

I tried with key i virgined with vvdi pro. Will try one more time.
Quote this message in a reply
02-03-2019, 09:53 AM,
Post: #25
RE: Yanhua mini ACDP programming tool
CAS3 board is easy to install
CAS4 board is a bit tricky both working good with mileage reset

Adding key on CAS3/3+ with working key works good, but you have to add on 4th place, when i try to use place 1-3 the app returns to place selection... (tested with some china keys)

FEM/BDC Mileage reset is also working good, for eep reading use a clamp instead of puncture socket, that cames with the device.

tested adding key on CAS4 but it was not working, dont know if it was ACDP problem or china key problem

RF Test is working good, tested some key (VW, audi, porsche) but tested without app only with RF test adapter
Quote this message in a reply
07-03-2019, 13:33 PM,
Post: #26
RE: Yanhua mini ACDP programming tool
(02-03-2019, 09:53 AM)Chriz Wrote:  CAS3 board is easy to install
CAS4 board is a bit tricky both working good with mileage reset

Adding key on CAS3/3+ with working key works good, but you have to add on 4th place, when i try to use place 1-3 the app returns to place selection... (tested with some china keys)

FEM/BDC Mileage reset is also working good, for eep reading use a clamp instead of puncture socket, that cames with the device.

tested adding key on CAS4 but it was not working, dont know if it was ACDP problem or china key problem

RF Test is working good, tested some key (VW, audi, porsche) but tested without app only with RF test adapter

--------------------------------------------------
Nice to see someone with the tool!!

Read ISN OBD on F10 N55 engine. Perfect. Read ISN on MEVD172 open ECU perfect.

Ill try another key, all keys lost with ISN.

I tried using the key BV to test frequency. Are you using the same or the black frequency adapter? Is that sold separately? Tried the key renew functionality? Mine does not work for third party keys, but works for a key made with the tool and for which eeprom dump available
Quote this message in a reply
07-03-2019, 18:13 PM,
Post: #27
RE: Yanhua mini ACDP programming tool
Just tried CAS3+ with spare key available. 100% ok
Quote this message in a reply
07-03-2019, 19:40 PM, (This post was last modified: 08-03-2019, 06:02 AM by Chriz.)
Post: #28
RE: Yanhua mini ACDP programming tool
There is an extra RF Adapter to test the Frequency, and the RF Test Adapter can run without ACDP Program, App... Yes is sold separately

[Image: yanhua-mini-acdp-rf-adapter-remote-frequ...ster-8.jpg]

Try to renew key over soldering points and P8P Adapter, go to Key Renew Menu and press Help button, there you can see the soldering points.

--------------------------

just found this information, a new update is released

Yanhua Mini ACDP renew the EEPROM data of CAS1 - CAS4.
CAS1 (0K50E)
CAS2 (2k79x)
CAS3 (0L01Y/0L15Y/0M23S)
CAS4 (1L15Y / 5M48H /1N35H) refresh & coding by ICP.

Function
Renew the EEPROM data of CAS1-CAS4. New EEPROM data can be generated by loading EEPROM data of other cars, modifying vehicle frequency, VIN, ISN code and other info, to solve the problem of replacement a CAS module because of missing EEPROM data of CAS module or failed
reading EEPROM data of CAS module.
Quote this message in a reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Need universal OBD2 odometer correction Tool, what to buy ? bmwadriatic 14 996 05-03-2019, 06:33 AM
Last Post: Yuki Shi
  IAW5 ECU Smok Tool Dash_Burner 1 1,014 16-02-2019, 14:13 PM
Last Post: km666
XSMini Solved ✔ Mini Cooper Cas3 need help marko.p 17 473 04-02-2019, 21:33 PM
Last Post: marko.p
  BMW MINI ONE mileage Harrycz44 1 148 19-01-2019, 17:46 PM
Last Post: teerak2uk
0Dash Dashoard Service Tool 6.4 Full Andy1989 10 1,380 25-12-2018, 19:01 PM
Last Post: BOULEFAA
YTMercedes Mercedes W212 2016 KM Tool Fraz 1 291 30-11-2018, 18:45 PM
Last Post: octav_kiss
0Engine EDC 17 DUMP TOOL MILAGE Crysis05 27 8,837 12-11-2018, 14:58 PM
Last Post: andro822
  Smok Jtag,X-Prog,or any tool? km666 4 421 09-11-2018, 20:58 PM
Last Post: GOGO
0Dash X-tool update activation danocar 4 1,067 08-11-2018, 13:58 PM
Last Post: km666
HLotus info smok tool autodoctor 0 369 21-10-2018, 23:07 PM
Last Post: autodoctor

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content