Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Yanhua mini ACDP programming tool
19-09-2018, 08:58 AM, (This post was last modified: 19-09-2018, 09:31 AM by sunshine2018.)
Post: #21
RE: Yanhua mini ACDP programming tool
(31-08-2018, 16:22 PM)Chriz Wrote:  But sometimes it’s tricky to place the probes correctly, it’s faster to use other programmer
until you have figured out how to place probes correctly

The newest version (09-19-2018)ACDP with improved CAS3 and CAS4 board fix the problem that it’s difficult to place the probes correctly.

(13-09-2018, 08:32 AM)milkyway Wrote:  For FEM/BDC I use my Autohex II and for eeproms my other stuff like R27, Codiprog USB mk2 and Orange5.

CU Oliver
For FEM/BDC, 3 months ago, it needed FEM electric bridges to complete. Now update Mini ACDP to the newest version, it won't need the electric bridges any more, it is easy to use.
   
Quote this message in a reply
05-02-2019, 02:48 AM,
Post: #22
RE: Yanhua mini ACDP programming tool
I am getting this tool but i have a question

1. Can i use it with PC without a wifi network?
2. Can it be used without internet or that is a necessity
Quote this message in a reply
28-02-2019, 08:32 AM,
Post: #23
RE: Yanhua mini ACDP programming tool
Arrived, set up and ready to go. Wifi a necessity, managed to connect to my PC too.
Quote this message in a reply
02-03-2019, 03:55 AM,
Post: #24
RE: Yanhua mini ACDP programming tool
I have tested the tool
1. Seems easy to fix CAS bridge. Read two CAS3+ 0L15Y. OK.
2. Attempted to make key all keys lost by ISN but key does not work. Tried by 64 attempt method but that process has a flow. At no point does it ask to write dump back to CAS though it needs CAS installed back to car. All this on bench so ill play some more
3. Key frequency detection does not work for me. Following up with support.

Its a lovely tool if it could improve on its weaknesses. I use PC exclusively.

I tried with key i virgined with vvdi pro. Will try one more time.
Quote this message in a reply
02-03-2019, 09:53 AM,
Post: #25
RE: Yanhua mini ACDP programming tool
CAS3 board is easy to install
CAS4 board is a bit tricky both working good with mileage reset

Adding key on CAS3/3+ with working key works good, but you have to add on 4th place, when i try to use place 1-3 the app returns to place selection... (tested with some china keys)

FEM/BDC Mileage reset is also working good, for eep reading use a clamp instead of puncture socket, that cames with the device.

tested adding key on CAS4 but it was not working, dont know if it was ACDP problem or china key problem

RF Test is working good, tested some key (VW, audi, porsche) but tested without app only with RF test adapter
Quote this message in a reply
07-03-2019, 13:33 PM,
Post: #26
RE: Yanhua mini ACDP programming tool
(02-03-2019, 09:53 AM)Chriz Wrote:  CAS3 board is easy to install
CAS4 board is a bit tricky both working good with mileage reset

Adding key on CAS3/3+ with working key works good, but you have to add on 4th place, when i try to use place 1-3 the app returns to place selection... (tested with some china keys)

FEM/BDC Mileage reset is also working good, for eep reading use a clamp instead of puncture socket, that cames with the device.

tested adding key on CAS4 but it was not working, dont know if it was ACDP problem or china key problem

RF Test is working good, tested some key (VW, audi, porsche) but tested without app only with RF test adapter

--------------------------------------------------
Nice to see someone with the tool!!

Read ISN OBD on F10 N55 engine. Perfect. Read ISN on MEVD172 open ECU perfect.

Ill try another key, all keys lost with ISN.

I tried using the key BV to test frequency. Are you using the same or the black frequency adapter? Is that sold separately? Tried the key renew functionality? Mine does not work for third party keys, but works for a key made with the tool and for which eeprom dump available
Quote this message in a reply
07-03-2019, 18:13 PM,
Post: #27
RE: Yanhua mini ACDP programming tool
Just tried CAS3+ with spare key available. 100% ok
Quote this message in a reply
07-03-2019, 19:40 PM, (This post was last modified: 08-03-2019, 06:02 AM by Chriz.)
Post: #28
RE: Yanhua mini ACDP programming tool
There is an extra RF Adapter to test the Frequency, and the RF Test Adapter can run without ACDP Program, App... Yes is sold separately

[Image: yanhua-mini-acdp-rf-adapter-remote-frequ...ster-8.jpg]

Try to renew key over soldering points and P8P Adapter, go to Key Renew Menu and press Help button, there you can see the soldering points.

--------------------------

just found this information, a new update is released

Yanhua Mini ACDP renew the EEPROM data of CAS1 - CAS4.
CAS1 (0K50E)
CAS2 (2k79x)
CAS3 (0L01Y/0L15Y/0M23S)
CAS4 (1L15Y / 5M48H /1N35H) refresh & coding by ICP.

Function
Renew the EEPROM data of CAS1-CAS4. New EEPROM data can be generated by loading EEPROM data of other cars, modifying vehicle frequency, VIN, ISN code and other info, to solve the problem of replacement a CAS module because of missing EEPROM data of CAS module or failed
reading EEPROM data of CAS module.
Quote this message in a reply
28-03-2019, 19:45 PM,
Post: #29
RE: Yanhua mini ACDP programming tool
I tried the renew on a cas2 but it is not working. Checked with isn tool

Today made a cas4 spare key. SUCCESS! CAR STARTS. strangely it asked me notto write back eeprom! I found that interesting. Only problem is remote lock unlock not working. Used a virgined original key. No sure if that may be an issue. Will test more
Quote this message in a reply
29-03-2019, 08:25 AM,
Post: #30
RE: Yanhua mini ACDP programming tool
Seems to be normal that you don’t need to write back eeprom. Friend with autohex confirmed that.
But I have the same issue car starts but locking/unlocking does not work. Though it was Problem from China key, but seems to be ACDP problem.

Reading ISN from MSD85 works fine without opening ecu, but write isn you need tricore pass and opening ecu. But with no tool that reads password this function is useless, hope they add a function to get password over ACDP.

When I can’t write isn to dme I will try to renew cas and write isn from dme in cas, hope that will work biggrin i will Test these days and Report
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
ILandRover LR Discovery 3 - 2008 - IPC Programming arturjfonseca 1 70 25-03-2024, 00:24 AM
Last Post: toutou_gsm
XSMini Solved ✔ Mini Cluster 6211-6957297 - MC912DG128 (3K91D) Flash please urgi 1 52 22-03-2024, 15:13 PM
Last Post: urgi
  Mini cooper r50 nikosmb 5 1,210 22-02-2024, 10:09 AM
Last Post: km666
XSMini MINI r50 3k91d need flash Gabriel130592 0 113 20-12-2023, 02:32 AM
Last Post: Gabriel130592
XZBMW Doubt with cluster change with 35128 chip and yanhua yh35xx programmer fitacuevas 3 684 10-11-2023, 01:12 AM
Last Post: David.D
XSMini Mini f60 6wb “most” problem pavlo210482 3 316 29-10-2023, 15:00 PM
Last Post: pavlo210482
  JLR Evoque/Disco sport 93C76/86 Vin checksum tool jamine16 1 392 27-09-2023, 10:59 AM
Last Post: raffy haddad
0Dash X-tool suppot/Feedback/backup thread volavka 243 117,859 23-09-2023, 05:57 AM
Last Post: canisha
XZBMW MD1 need to reset mileage on DME MINI F55 dfb 2 520 27-06-2023, 17:13 PM
Last Post: dfb
XSMini mini f60 6WB vin change pavlo210482 3 539 24-06-2023, 12:22 PM
Last Post: Inerceptor

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content