Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. AutoHex II

  2. FemtoEVO

  3. Cas4 & Cas4+



BMW Icom A2 repair
03-08-2018, 08:07 AM,
Post: #1
XZBMW  BMW Icom A2 repair
How to fix Icom A2 Clone with all red leds?
Quote this message in a reply
03-08-2018, 09:23 AM,
Post: #2
RE: BMW Icom A2 repair
This indicates that mega16 does not start. The reason is in poor soldering or its malfunction.
Quote this message in a reply
[+] 4 users say Thank You to ferrum for this post
03-08-2018, 13:23 PM,
Post: #3
RE: BMW Icom A2 repair
(03-08-2018, 09:23 AM)ferrum Wrote:  This indicates that mega16 does not start. The reason is in poor soldering or its malfunction.

@ferrum can you fix it too?
Quote this message in a reply
03-08-2018, 14:55 PM, (This post was last modified: 03-08-2018, 14:57 PM by ferrum.)
Post: #4
RE: BMW Icom A2 repair
There is a bad soldering.
If mega16 is dead, then a donor is needed.
A new mega16 is not something to flash, the firmware is locked.


Attached Files Thumbnail(s)
   
Quote this message in a reply
[+] 2 users say Thank You to ferrum for this post
10-08-2018, 14:59 PM, (This post was last modified: 10-08-2018, 15:00 PM by peeluoff.)
Post: #5
RE: BMW Icom A2 repair
My ICOM A2 flashes ONCE and only Once , when I connect it to my OBD in my car fail. This just started a day ago. dontknow Does this mean my ICOM A2 is locked ? Can it be reset ? If so, what's the Procedure? Thanks for any information you may have...
Quote this message in a reply
10-08-2018, 22:34 PM,
Post: #6
RE: BMW Icom A2 repair
(03-08-2018, 14:55 PM)ferrum Wrote:  There is a bad soldering.
If mega16 is dead, then a donor is needed.
A new mega16 is not something to flash, the firmware is locked.

Hi Ferrum!

My ICOM-m LED's brightness is not very strong, as if it had been changed in this picture, but exactly what kind of typing? think

But ICOM-B has very low brightness LEDs too. worried
Quote this message in a reply
11-08-2018, 15:09 PM,
Post: #7
RE: BMW Icom A2 repair
(10-08-2018, 14:59 PM)peeluoff Wrote:  My ICOM A2 flashes ONCE and only Once , when I connect it to my OBD in my car fail. This just started a day ago. dontknow Does this mean my ICOM A2 is locked ? Can it be reset ? If so, what's the Procedure? Thanks for any information you may have...


Hi,

Same Problem here. All LEDs flashing red only once, then it seems dead except the fan inside.

Also no reaction to USB Restore.

Any solution?

Regards,t
Tom
Quote this message in a reply
13-08-2018, 12:09 PM,
Post: #8
RE: BMW Icom A2 repair
Hello,

I've found a solution for my LEDs "All Flashing RED Once".

It is quite funny but I tried a reflow myself.


Just removed central the PCB and put it in my oven for about 10 minutes at 200 deg. celsius (preheated).

After that let cool down, reconnect to LAN-PCB an OBD and it worked.

Maybe someone else can solve it this way too.

But: I'm not responsible for any damage. Do this at your own risk!

Regards,
Tom
Quote this message in a reply
13-08-2018, 12:33 PM,
Post: #9
RE: BMW Icom A2 repair
any way to fix most adapter led brightness?
Quote this message in a reply
13-08-2018, 16:28 PM,
Post: #10
RE: BMW Icom A2 repair
(13-08-2018, 12:33 PM)Silva1337 Wrote:  any way to fix most adapter led brightness?

I'm also waiting the solutions! thinking
   
Quote this message in a reply


Possibly Related Threads...
Thread Author Replies Views Last Post
XZBMW can icom a have next firmware installed in it larrytate913 5 555 10-10-2019, 08:59 AM
Last Post: Vojno
XZBMW I need help with icom next original kimetp 1 152 09-10-2019, 20:47 PM
Last Post: Ecutech
  Icom A2 clone configuration page lustek 1 113 09-10-2019, 17:40 PM
Last Post: emhtuning
XZBMW ICOMP, ICOM Next Connection problem with ISTA emaflo1978 42 1,771 09-10-2019, 08:27 AM
Last Post: Vojno
XZBMW BMW ICOM choice ? FatMama 5 263 08-10-2019, 17:37 PM
Last Post: bmwcoder75
  HU NBT FSC Repair PACK - F331279 giampi.bll 1 120 08-10-2019, 06:48 AM
Last Post: ThomBmw330xd
XZBMW Bmw NBT Fsc repair kit StarmanBL 0 87 07-10-2019, 16:16 PM
Last Post: StarmanBL
XZBMW iToolRadar doesn`t find ICOM Illuminati23 9 292 07-10-2019, 09:55 AM
Last Post: ImmBoo
XZBMW OPINIONS ABOUT THIS ICOM PCB TeamActivator 4 331 06-10-2019, 01:28 AM
Last Post: TeamActivator
  Cannot connect to car with Esys - Enet and Icom Next maxwell4321 16 550 05-10-2019, 18:50 PM
Last Post: krug

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content