Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW Icom A2 repair
13-08-2018, 17:09 PM,
Post: #11
|
|||
|
|||
RE: BMW Icom A2 repair
Only replacement for diodes with greater brightness
|
|||
24-08-2018, 20:56 PM,
(This post was last modified: 24-08-2018, 20:58 PM by paskuale.)
Post: #12
|
|||
|
|||
RE: BMW Icom A2 repair
I have another problem on ICOM A2 clone.
It boots normally (system Led is green fixed) but when I plug LAN cable, LAN LED starts blinking green but no connection with PC. It never become fixed. Already tried ICOM Restore by USB and nothing change. Can someone help me please ? Thank you |
|||
24-08-2018, 21:04 PM,
(This post was last modified: 24-08-2018, 21:15 PM by ferrum.)
Post: #13
|
|||
|
|||
RE: BMW Icom A2 repair
The problem with lan can be solved by replacing the micrel.
Check all the lines from lan to micrel and if it's okay then change micrel |
|||
Reputation: +1 - paskuale [+1] | |||
24-08-2018, 22:40 PM,
Post: #14
|
|||
|
|||
RE: BMW Icom A2 repair
Where I can find this Ethernet Switch ?
Micrel and Microchip are the same ? Thank you |
|||
25-08-2018, 04:43 AM,
Post: #15
|
|||
|
|||
RE: BMW Icom A2 repair
Need help. My ICOM A2 Spansion NOR Flash is damaged. i tried to replace it and use the restore from usb doesn't work. It just blinks red once. Put the old one back and then it fails to boot. Jut blinks green. How do i load the firmware on a new NOR flash, Which programmer to use and how. Can i make backup from the old NOR flash from the ICOM? I saw people use teensy 2.0 ++ to make a dump and restore. Will it work? Because the PS3 also comes with Spansion but 128mb chip, Icom has a 64mb chip.
Please advise. |
|||
25-08-2018, 12:14 PM,
(This post was last modified: 25-08-2018, 12:22 PM by ferrum.)
Post: #16
|
|||
|
|||
RE: BMW Icom A2 repair
Spansion Flash must be programmed before soldering and then restore ICOM.
|