Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

BMW Icom A2 repair
28-09-2019, 02:47 AM,
Post: #71
RE: BMW Icom A2 repair
My icom clone have always fault aboute fan and wlan.
I do aboute 200 cars with it and nothing happens - errors was from the beginning.
But if there is firmware version that exclude fan i will try. Is there any option to remove wlan fault too?

Can you show me in with eeprom i must change serial number?

If I helped, please magic buttons thx+rep yes yes yes under under under
Quote this message in a reply
[+] 1 user says Thank You to lustek for this post
28-09-2019, 11:17 AM,
Post: #72
RE: BMW Icom A2 repair
Post 64
detailed instructions
Quote this message in a reply
[+] 1 user says Thank You to ferrum for this post
28-09-2019, 19:39 PM,
Post: #73
RE: BMW Icom A2 repair
Hello Friends anyone help me for the icom a2 terminal 15 is 0 volts have anyone any ideas or scheme how to find and fix this problem
Quote this message in a reply
09-10-2019, 15:48 PM,
Post: #74
XZBMW  RE: BMW Icom A2 repair
(14-09-2019, 07:07 AM)ferrum Wrote:  The simplest thing you can try is to restore the firmware. Sometimes it helps. If the button does not work for you, then check if it is disabled.
its working but red blinking stil flashing, i try to test fan still error...any suggested to repair red blinking??
tks
Quote this message in a reply
09-10-2019, 21:58 PM,
Post: #75
RE: BMW Icom A2 repair
Did you connect a fan?
Did the fan spin?
I showed a photo of connecting a fan with a speed sensor.
Quote this message in a reply
10-10-2019, 19:11 PM,
Post: #76
RE: BMW Icom A2 repair
(09-10-2019, 21:58 PM)ferrum Wrote:  Did you connect a fan?
Did the fan spin?
I showed a photo of connecting a fan with a speed sensor.

yes i connect a fan, its spin for first i connect icom after that fan stop spin and still got fan test error
Quote this message in a reply
10-10-2019, 20:39 PM,
Post: #77
RE: BMW Icom A2 repair
(30-08-2019, 10:25 AM)ferrum Wrote:  This can be easily understood by looking at the datasheet mega16.
ICOM has a very complex power scheme with PWM.


Hi,
I studied the datasheet of the mpc5200b now.
It's impossible to get access to the Avdd-Pin - it's in the third row, so no change without desoldering the processor.
Is there somewhare an simply accessable measurement point for checking power supply?

Br
Stiffi
Quote this message in a reply
10-10-2019, 23:22 PM, (This post was last modified: 10-10-2019, 23:37 PM by ferrum.)
Post: #78
RE: BMW Icom A2 repair
You have a problem in mega16
I can give a breakpoint if it is available but you do not understand me.


Attached Files Thumbnail(s)
       
Quote this message in a reply
[+] 2 users say Thank You to ferrum for this post
15-10-2019, 16:56 PM,
Post: #79
RE: BMW Icom A2 repair
(10-10-2019, 23:22 PM)ferrum Wrote:  You have a problem in mega16
I can give a breakpoint if it is available but you do not understand me.

Thanks. 
Running again wink
Solution was a lot of contact spray for the mega16

I was always looking for the main processor but with your last post, I double checked and found mega16 fail

Many many thanks!

Br
Chris
Quote this message in a reply
18-10-2019, 05:27 AM, (This post was last modified: 18-10-2019, 05:29 AM by tictach.)
Post: #80
RE: BMW Icom A2 repair
Hi all .. anyone have icom a2 24c02 eeprom file . my icom leeds red al time and can not restor . read out 24c02 and se some hex missing comparing hex to picture i found.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  CCC flash WINKFP ICOM BimmerSLO 8 113 2 hours ago
Last Post: Mefiuu92
  [MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 102 34,797 27-03-2024, 05:59 AM
Last Post: hashtagmaster
XZBMW Poor wifi signal from new ICOM's bmchicago 1 140 26-03-2024, 03:04 AM
Last Post: rocdeng
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 16 3,910 24-03-2024, 11:29 AM
Last Post: Twointje
XZBMW Request KAFAS FSC repair pack miru75 74 8,334 23-03-2024, 17:50 PM
Last Post: radeeek17
  TESTO tool with ICOM Rolzs 5 318 17-03-2024, 20:23 PM
Last Post: Vojno
  Request xHP 6HP decrypted files and icom flasher tste1982 10 834 05-03-2024, 22:47 PM
Last Post: bradsm87
  FRM repair and clone DME & DDE jaki 27 1,342 01-03-2024, 22:52 PM
Last Post: r0my81
XZBMW FRM3 F11 XEP100 need dump or repair 530d 2 144 22-02-2024, 15:33 PM
Last Post: 530d
XZBMW ICOM Firmware (NEXT & A2) always current! Vojno 203 41,992 16-02-2024, 19:32 PM
Last Post: Vojno

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content