[gvitkis]

I performed the complete retrofit Kafas2 for F30
I bought the FSC 7E-BE-BF codes for VIN in BMW, KAFAS2 ECU, camera and pushbutton for F30 in ebay.
The KAFAS donor machine only had the FSC code 7E for the speed limit, in fact when I checked CECK STATUS FSC, I saw in KAFAS only 7E, BF and BE I did not see them, not even rejected, CECK STATUS FSC does not show anything related to BF-BE, I entered FSC 7E purchased in BMW was written and successfully activated. While for BE-BF ESYS always returns the error and does not write and activate FSC.
At this point I thought to perform the flash KAFAS2 with PSZ 3.64, with more in FA 5AD, 5AG, 5AS, 8TH.
I have calculated more than 20 SVT-TARGETs with I-STEP (shipm) different but ESYS has always been HAWEL RED
I attach a photo, I hope you can help me solve this problem.
Thank you very much.

[chang2]

Hello,

for import change ZK and Build -I-Stufe.

HWEL: BD0 to - F020-13-03-505
HWEL: FB7 from - F020-13-07-500

thanks

[gvitkis]

Hello,

for import change ZK and Build -I-Stufe.

HWEL: BD0 to - F020-13-03-505
HWEL: FB7 from - F020-13-07-500

thanks

Really thank you.
Which ZK should I enter?
What do you mean Build-I-Stufe

[best178]

I performed the complete retrofit Kafas2 for F30
I bought the FSC 7E-BE-BF codes for VIN in BMW, KAFAS2 ECU, camera and pushbutton for F30 in ebay.
The KAFAS donor machine only had the FSC code 7E for the speed limit, in fact when I checked CECK STATUS FSC, I saw in KAFAS only 7E, BF and BE I did not see them, not even rejected, CECK STATUS FSC does not show anything related to BF-BE, I entered FSC 7E purchased in BMW was written and successfully activated. While for BE-BF ESYS always returns the error and does not write and activate FSC.
At this point I thought to perform the flash KAFAS2 with PSZ 3.64, with more in FA 5AD, 5AG, 5AS, 8TH.
I have calculated more than 20 SVT-TARGETs with I-STEP (shipm) different but ESYS has always been HAWEL RED
I attach a photo, I hope you can help me solve this problem.
Thank you very much.

Hello dear friend,
I have a similar problem with my F26 X4 2016, my problem is that KOMBI needs to be programmed, but for that ISTA + calculates a working plan that ask me to import "enabling activation code" for the following ecu's :
EPS
KAFAS
HU_H

In order to accomplish the calculated working plan and perform the rest of the operations, I have tried to solve the problem with E-SYS but I am not expert enough to have a good result, my question is, could you please help me fix this issue, I can give you teamviewer access and I pay for that no worries

I hope to hear from you quite soon

Best regards

[psya]

I performed the complete retrofit Kafas2 for F30
I bought the FSC 7E-BE-BF codes for VIN in BMW, KAFAS2 ECU, camera and pushbutton for F30 in ebay.
The KAFAS donor machine only had the FSC code 7E for the speed limit, in fact when I checked CECK STATUS FSC, I saw in KAFAS only 7E, BF and BE I did not see them, not even rejected, CECK STATUS FSC does not show anything related to BF-BE, I entered FSC 7E purchased in BMW was written and successfully activated. While for BE-BF ESYS always returns the error and does not write and activate FSC.
At this point I thought to perform the flash KAFAS2 with PSZ 3.64, with more in FA 5AD, 5AG, 5AS, 8TH.
I have calculated more than 20 SVT-TARGETs with I-STEP (shipm) different but ESYS has always been HAWEL RED
I attach a photo, I hope you can help me solve this problem.
Thank you very much.

Hello dear friend,
I have a similar problem with my F26 X4 2016, my problem is that KOMBI needs to be programmed, but for that ISTA + calculates a working plan that ask me to import "enabling activation code" for the following ecu's :
EPS
KAFAS
HU_H

In order to accomplish the calculated working plan and perform the rest of the operations, I have tried to solve the problem with E-SYS but I am not expert enough to have a good result, my question is, could you please help me fix this issue, I can give you teamviewer access and I pay for that no worries

I hope to hear from you quite soon

Best regards

Use esys

[gvitkis]

I performed the complete retrofit Kafas2 for F30
I bought the FSC 7E-BE-BF codes for VIN in BMW, KAFAS2 ECU, camera and pushbutton for F30 in ebay.
The KAFAS donor machine only had the FSC code 7E for the speed limit, in fact when I checked CECK STATUS FSC, I saw in KAFAS only 7E, BF and BE I did not see them, not even rejected, CECK STATUS FSC does not show anything related to BF-BE, I entered FSC 7E purchased in BMW was written and successfully activated. While for BE-BF ESYS always returns the error and does not write and activate FSC.
At this point I thought to perform the flash KAFAS2 with PSZ 3.64, with more in FA 5AD, 5AG, 5AS, 8TH.
I have calculated more than 20 SVT-TARGETs with I-STEP (shipm) different but ESYS has always been HAWEL RED
I attach a photo, I hope you can help me solve this problem.
Thank you very much.

Hello dear friend,
I have a similar problem with my F26 X4 2016, my problem is that KOMBI needs to be programmed, but for that ISTA + calculates a working plan that ask me to import "enabling activation code" for the following ecu's :
EPS
KAFAS
HU_H

In order to accomplish the calculated working plan and perform the rest of the operations, I have tried to solve the problem with E-SYS but I am not expert enough to have a good result, my question is, could you please help me fix this issue, I can give you teamviewer access and I pay for that no worries

I hope to hear from you quite soon

Best regards

Hello Friend
Yes, if you want I can control via TV.
Do not worry, I do not need money, you will not have to pay anything.

[SDL2000]

Hello,

for import change ZK and Build -I-Stufe.

HWEL: BD0 to - F020-13-03-505
HWEL: FB7  from - F020-13-07-500

thanks

Really thank you.
Which ZK should I enter?
What do you mean Build-I-Stufe

Hello! Could you update KAFAS2?

[Arthurhuynh]

Dear chang2, gvitkis
Can u help me code for kafas 2 with SLI, FCW, Pedes ... with fsc code and kindly let’s me know your price with support.
Thanks so much and waiting for your response