Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ICOM A2 Clone error
05-08-2018, 17:11 PM,
Post: #1
|
|||
|
|||
ICOM A2 Clone error
My buddy has a clone ICOM A2 that itools cannot see. Only way to see it, is if I input the icom ip address manually into itools and ista-p. I told his him he needed to restore back to factory spec. He tried and said it was not possible. So he brought it to me and I tried. I follow the instructions on how to do it. First three lights (Comm,WLAN and LAN) go green but when it gets to the system light, it never goes green. It just stays red. Here is the Restore Log.
"Builddate 2014-04-17 16:25 mount: mounting /dev/mtdblock/config on /config failed mount: mounting /dev/mtdblock/config on /config failed => Updating boot image 1 => Updating app image 1 mount: mounting /dev/mtdblock/app1 on /app failed tar: can't open 'BUILDDATE': Read-only file system umount: cannot umount /app: Invalid argument => Resetting u-boot parameters Current Mac:" USB is FAT32. Could it be I have a bad ICOM_RESTORE.bin file? Cheers. |
|||
06-08-2018, 07:04 AM,
(This post was last modified: 06-08-2018, 07:04 AM by willisodhiambo.)
Post: #2
|
|||
|
|||
RE: ICOM A2 Clone error
Bad ICOM. I tried to restore a clone and it hanged. Now not giving IP and shows @UNsupport.
Decided to get a genuine one after three useless Chinese clones. They used to make them very well. Of late they are all junk. |
|||
06-08-2018, 10:03 AM,
Post: #3
|
|||
|
|||
RE: ICOM A2 Clone error
I had an issue too with my icom “a3” clone - not having ethernet link/network and resulted that the os rom was faulty. Replaced wirh a new samsung one from aliexpress and reflashed with icom restore.bin successfully
|
|||
06-08-2018, 15:16 PM,
Post: #4
|
|||
|
|||
RE: ICOM A2 Clone error
(06-08-2018, 10:03 AM)danyro Wrote: I had an issue too with my icom “a3” clone - not having ethernet link/network and resulted that the os rom was faulty. Replaced wirh a new samsung one from aliexpress and reflashed with icom restore.bin successfully Samsung? Could you please elaborate on that. Thanks. |
|||
28-06-2019, 13:00 PM,
Post: #5
|
|||
|
|||
RE: ICOM A2 Clone error
what s samsung faulty please explain more ... I have same problem ...
|
|||
28-06-2019, 14:34 PM,
Post: #6
|
|||
|
|||
RE: ICOM A2 Clone error
i've got fro AE this type of chip - K9F2G08U0B
this was the seller - https://www.aliexpress.com/item/32829491...4c4dEcx1Cp i've this type of icom a3 - https://www.aliexpress.com/item/32352591...st=ae803_4 |
|||
01-07-2019, 14:10 PM,
Post: #7
|
|||
|
|||
RE: ICOM A2 Clone error
How do you upload the restore file to ICOM? ICOM_RESTORE.bin must be in the root directory itself, the usb drive will be connected to ICOM, and then you plug the ICOM plug into the OBD and wait.
I also have a firewall problem. Try turning it off. I also found it useful to disable DHCP and enter a permanent IP address. (05-08-2018, 17:11 PM)rond79 Wrote: My buddy has a clone ICOM A2 that itools cannot see. Only way to see it, is if I input the icom ip address manually into itools and ista-p. I told his him he needed to restore back to factory spec. He tried and said it was not possible. So he brought it to me and I tried. I follow the instructions on how to do it. First three lights (Comm,WLAN and LAN) go green but when it gets to the system light, it never goes green. It just stays red. Here is the Restore Log. |
|||
06-07-2019, 03:36 AM,
Post: #8
|
|||
|
|||
RE: ICOM A2 Clone error
(01-07-2019, 14:10 PM)Rooster330i Wrote: How do you upload the restore file to ICOM? ICOM_RESTORE.bin must be in the root directory itself, the usb drive will be connected to ICOM, and then you plug the ICOM plug into the OBD and wait. "ICOM_RESTORE.bin must be in the root directory itself." May you please elaborate on this? Cheers Mate. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Need help for an error. | TibeRiuSca | 1 | 43 |
4 hours ago Last Post: cipi gutuie |
|
[MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS | hashtagmaster | 105 | 35,732 |
Yesterday, 18:36 PM Last Post: hashtagmaster |
|
ICOM Firmware (NEXT & A2) always current! | Vojno | 206 | 42,861 |
12-04-2024, 23:36 PM Last Post: bennymx |
|
Poor wifi signal from new ICOM's | bmchicago | 3 | 295 |
12-04-2024, 18:55 PM Last Post: Node |
|
VO code RSE_HIGH_NBT2 error | HU_man | 3 | 131 |
12-04-2024, 07:08 AM Last Post: Node |
|
Error by Ista ABL_DIT_AS6100_TRAMODE_RESET | arcelik | 18 | 595 |
08-04-2024, 19:58 PM Last Post: Fatalix |
|
xdrive off with esys without error in dash | dankocg | 14 | 2,810 |
07-04-2024, 08:57 AM Last Post: Fatalix |
|
NBT Evo CAFD missing after coding error | Mugga | 12 | 491 |
05-04-2024, 20:30 PM Last Post: Mugga |
|
Solved ✔ ICOM NEXT Error | bmwcare | 4 | 2,470 |
01-04-2024, 11:34 AM Last Post: ivanp |
|
CCC flash WINKFP ICOM | BimmerSLO | 9 | 357 |
29-03-2024, 19:17 PM Last Post: Hoborg |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content