[jacques23]

hi can somebody please check the dump and key data read with upa transponder added with fvdi car just swings ecu light stays on no errors with upa or fvdi during programming eeprom 24c04 chip used id 4d70 Toyota help will be appreciated

josh programmed fvdi.rar
File Type:
Downloaded:	2 times
Size:	173 bytes

[raffy haddad]

hello
your dump is for toyota and i read somewhere that c1 citroene use same immobox
if your trying to make transponder by dump you need cn2 or 4d60 transponder if all key lost
good luck

edit fvdi has lots of bugs in tagtool
use proper key maker and you should be ok

[jacques23]

hello
your dump is for toyota and i read somewhere that c1 citroene use same immobox
if your trying to make transponder by dump you need cn2 or 4d60 transponder if all key lost
good luck

edit fvdi has lots of bugs in tagtool
use proper key maker and you should be ok

hi ill try with 4d60 transponder that's what I tried initially it failed with fvdi I only got fvdi and skp900 so last resort I asking someone with a right tool thank you so much

[raffy haddad]

try to write these pages with fvdi tiris 4d onto 4d60 or tpx2
pg1 00
pg2 47
pg3 52CF32
pg4 889F4901A3
and car should start

p.s is the dump original or made by fvdi ?
And dont forget to report back
And to take time to push reputation and thanks button
Regards

[jacques23]

try to write these pages with fvdi tiris 4d onto 4d60 or tpx2
pg1 00
pg2 47
pg3 52CF32
pg4 889F4901A3
and car should start

p.s is the dump original or made by fvdi ?
And dont forget to report back
And to take time to push reputation and thanks button
Regards

hi ive read the eeprom with upa then upload on fvdi key tool then it add transponder and save the dump ive just managed too write the 4d60 transponder thanks so much will report back appreciate

---

try to write these pages with fvdi tiris 4d onto 4d60 or tpx2
pg1 00
pg2 47
pg3 52CF32
pg4 889F4901A3
and car should start

p.s is the dump original or made by fvdi ?
And dont forget to report back
And to take time to push reputation and thanks button
Regards

hi ive read the eeprom with upa then upload on fvdi key tool then it add transponder and save the dump ive just managed too write the 4d60 transponder thanks so much will report back appreciate

hi is this the procedure too write the page info do we use lock or program ?

[raffy haddad]

Use program but the dump file that you posted
Is it the original or is it from fvdi ?
If its from fvdi repost original
and also you can use tiris 4d this one 40 bit intead of tiris dst+ this one is for 80 bit

edit sorry pge 3 last bit should be FF not 00

[jacques23]

Use program but the dump file that you posted
Is it the original or is it from fvdi ?
If its from fvdi repost original
and also you can use tiris 4d this one 40 bit intead of tiris dst+ this one is for 80 bit

edit sorry pge 3 last bit should be FF not 00

hi here is original file read by upa

---

Use program but the dump file that you posted
Is it the original or is it from fvdi ?
If its from fvdi repost original
and also you can use tiris 4d this one 40 bit intead of tiris dst+ this one is for 80 bit

edit sorry pge 3 last bit should be FF not 00

hi this is original file before programming with fvdi

---

hi this is the last blank transponder i got at the moment will it work

[raffy haddad]

ok here original pgs
pg1 00
pg2 A6
pg3 292DA0 FF
pg4 44551AE180

[jacques23]

Use program but the dump file that you posted
Is it the original or is it from fvdi ?
If its from fvdi repost original
and also you can use tiris 4d this one 40 bit intead of tiris dst+ this one is for 80 bit

edit sorry pge 3 last bit should be FF not 00

hi here is original file read by upa

---

Use program but the dump file that you posted
Is it the original or is it from fvdi ?
If its from fvdi repost original
and also you can use tiris 4d this one 40 bit intead of tiris dst+ this one is for 80 bit

edit sorry pge 3 last bit should be FF not 00

hi this is original file before programming with fvdi

---

hi this is the last blank transponder i got at the moment will it work

if i put a blank transponder and fill out the user page and so on must i write the dump back too eeprom in immo box or will it work without doing it sorry all the questions im still learning thanks for youre time and patience appreciate

[raffy haddad]

put original dump and program transponder pgs as last post and start car
please report