Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Xentry Diagnostics PassThru OpenShell 2018.05-07 can not read cars above 2010
10-08-2018, 09:51 AM,
(This post was last modified: 20-08-2018, 13:50 PM by Clusters.)
Post: #1
|
|||
|
|||
Xentry Diagnostics PassThru OpenShell 2018.05-07 can not read cars above 2010
Hello to all,
I have install to my friends Xentry Diagnostics PassThru OpenShell. For one I install 2018.05 and now to another friend of mine I install and set 2018.07 software version. Both of them have problem with connecting cars above 2010 year. Im installed softwares according Pesona steps for dummies: https://cartechnology.co.uk/showthread.php?tid=31441 Does anyone know what is potential problem. Best regards |
|||
10-08-2018, 12:35 PM,
Post: #2
|
|||
|
|||
RE: Xentry Diagnostics PassThru OpenShell 2018.05-07 can not read cars above 2010
when installing, which one do you choose, us or eu?
and what passthru device do you use? |
|||
10-08-2018, 13:57 PM,
Post: #3
|
|||
|
|||
RE: Xentry Diagnostics PassThru OpenShell 2018.05-07 can not read cars above 2010
Im using MB STAR C4 chinese clone, and what do you mean under US or EU? If you mean setup language hmm sometimes I use Englis US.
|
|||
10-08-2018, 15:08 PM,
(This post was last modified: 10-08-2018, 15:09 PM by leminhautotek.)
Post: #4
|
|||
|
|||
RE: Xentry Diagnostics PassThru OpenShell 2018.05-07 can not read cars above 2010
you installed xentry openshell xdos, not passthru
its seem your xentry has trouble your das is ok take a picture and post here |
|||
10-08-2018, 15:35 PM,
Post: #5
|
|||
|
|||
RE: Xentry Diagnostics PassThru OpenShell 2018.05-07 can not read cars above 2010
yes, take screenshots of the diagnose failures.
also if possible do a self test using sdconnect toolkit. it is useful for checking the hardware. |
|||
10-08-2018, 17:50 PM,
Post: #6
|
|||
|
|||
RE: Xentry Diagnostics PassThru OpenShell 2018.05-07 can not read cars above 2010
Thanks mate, I will upload pictures tomorrow, hardware is ok I test it using sdconnect toolkit, and it works in DAS I can do diagnose with DAS on older cars.
|
|||
11-08-2018, 10:08 AM,
Post: #7
|
|||
|
|||
RE: Xentry Diagnostics PassThru OpenShell 2018.05-07 can not read cars above 2010
(10-08-2018, 15:35 PM)pesona Wrote: yes, take screenshots of the diagnose failures. Here is screenshot of error. I mention that DAS work ok and I can diagnose cars in DAS. I have seen this error on DAS in some of earlyer versions, but never faced with this error in Xentry. Is it maybe problem because I clone HDD with all softwares set. Once I install all softwares and set it to work with Lenovo Thinkpad T420 then im just clone hard drive and put it in another T420 its easyer than all softwares set again and again. Sorry because of my englis I hope you understand my problem. Regards |
|||
11-08-2018, 11:11 AM,
(This post was last modified: 11-08-2018, 11:12 AM by pesona.)
Post: #8
|
|||
|
|||
RE: Xentry Diagnostics PassThru OpenShell 2018.05-07 can not read cars above 2010
i know you said that DAS works but i apologize if i have to ask this question.
i ask the question because: 1. i don't see sdconnect toolkit in the task tray. (probably it is hidden and not shown) 2. the error message is "vci is not available". it means sdconnect (vci) doesn't connect to the computer. my questions: 1. what xentry software do you install? is it the one that i gave the link in the thread? fyi, it is xentry openshell passthru use with passthru device and not xentry das openshell (xdos) that use sdconnect 2. after cloning, do you set the lan tcp/ip again? the easy way is by teamviewer. it is a pity, i don't do tv. |
|||
Reputation: +1 - Marcos [+1] | |||
11-08-2018, 12:57 PM,
Post: #9
|
|||
|
|||
RE: Xentry Diagnostics PassThru OpenShell 2018.05-07 can not read cars above 2010
(11-08-2018, 11:11 AM)pesona Wrote: i know you said that DAS works but i apologize if i have to ask this question. I have download and installed software from this link https://cartechnology.co.uk/showthread.php?tid=36434 And im using your steps from your post to set all, I have set lan address too. |
|||
12-08-2018, 05:35 AM,
Post: #10
|
|||
|
|||
RE: Xentry Diagnostics PassThru OpenShell 2018.05-07 can not read cars above 2010
(11-08-2018, 10:08 AM)consigliere3 Wrote:(10-08-2018, 15:35 PM)pesona Wrote: yes, take screenshots of the diagnose failures. try to reconfigurate sdconect in configAssit or data crashed after clone hdd |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content