Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
CCC is dead after ista/p programming
15-08-2018, 14:56 PM,
Post: #1
|
|||
|
|||
CCC is dead after ista/p programming
Hi, can someone help me with e60 and ccc? I disconnect the battery with ignition on and ccc is dead now. I try to use ista/p but i forgot about Most and now in my fiber optic is no light. Please help
|
|||
15-08-2018, 15:00 PM,
Post: #2
|
|||
|
|||
RE: CCC is dead after ista/p programming
(15-08-2018, 14:56 PM)radzisz97 Wrote: Hi, can someone help me with e60 and ccc? I disconnect the battery with ignition on and ccc is dead now. I try to use ista/p but i forgot about Most and now in my fiber optic is no light. Please help program again with MOST connected. CCC is initialized via Diagbus, not MOST. |
|||
15-08-2018, 15:05 PM,
Post: #3
|
|||
|
|||
RE: CCC is dead after ista/p programming
(15-08-2018, 15:00 PM)bmwcare Wrote:(15-08-2018, 14:56 PM)radzisz97 Wrote: Hi, can someone help me with e60 and ccc? I disconnect the battery with ignition on and ccc is dead now. I try to use ista/p but i forgot about Most and now in my fiber optic is no light. Please help Thanks for reply, i tried to but its doesnt worki... |
|||
15-08-2018, 17:15 PM,
(This post was last modified: 15-08-2018, 17:16 PM by radzisz97.)
Post: #4
|
|||
|
|||
RE: CCC is dead after ista/p programming
(15-08-2018, 15:00 PM)bmwcare Wrote:(15-08-2018, 14:56 PM)radzisz97 Wrote: Hi, can someone help me with e60 and ccc? I disconnect the battery with ignition on and ccc is dead now. I try to use ista/p but i forgot about Most and now in my fiber optic is no light. Please help |
|||
15-08-2018, 17:50 PM,
Post: #5
|
|||
|
|||
RE: CCC is dead after ista/p programming
(15-08-2018, 17:15 PM)radzisz97 Wrote:(15-08-2018, 15:00 PM)bmwcare Wrote:(15-08-2018, 14:56 PM)radzisz97 Wrote: Hi, can someone help me with e60 and ccc? I disconnect the battery with ignition on and ccc is dead now. I try to use ista/p but i forgot about Most and now in my fiber optic is no light. Please help close ista P..restart pc and run it again, 1st time ista-P will offer you reanimation the module write all part numbers and maybe you have luck..14volts recomended |
|||
15-08-2018, 17:58 PM,
Post: #6
|
|||
|
|||
RE: CCC is dead after ista/p programming
(15-08-2018, 17:50 PM)rs@chip Wrote:(15-08-2018, 17:15 PM)radzisz97 Wrote:(15-08-2018, 15:00 PM)bmwcare Wrote:(15-08-2018, 14:56 PM)radzisz97 Wrote: Hi, can someone help me with e60 and ccc? I disconnect the battery with ignition on and ccc is dead now. I try to use ista/p but i forgot about Most and now in my fiber optic is no light. Please help Its still the same, nothing change, maybe i can flash gateway by Winkfp ? |
|||
15-08-2018, 18:03 PM,
(This post was last modified: 15-08-2018, 23:13 PM by Clusters.)
Post: #7
|
|||
|
|||
RE: CCC is dead after ista/p programming
(15-08-2018, 17:58 PM)radzisz97 Wrote:(15-08-2018, 17:50 PM)rs@chip Wrote:(15-08-2018, 17:15 PM)radzisz97 Wrote:(15-08-2018, 15:00 PM)bmwcare Wrote:(15-08-2018, 14:56 PM)radzisz97 Wrote: Hi, can someone help me with e60 and ccc? I disconnect the battery with ignition on and ccc is dead now. I try to use ista/p but i forgot about Most and now in my fiber optic is no light. Please help yes you can try winkfp or NFS emergency flash https://www.youtube.com/watch?v=8okJjyLabpo |
|||
15-08-2018, 18:10 PM,
Post: #8
|
|||
|
|||
RE: CCC is dead after ista/p programming
(15-08-2018, 18:03 PM)rs@chip Wrote:(15-08-2018, 17:58 PM)radzisz97 Wrote:(15-08-2018, 17:50 PM)rs@chip Wrote:(15-08-2018, 17:15 PM)radzisz97 Wrote:(15-08-2018, 15:00 PM)bmwcare Wrote: program again with MOST connected. Can you tell me how to do IT ? |
|||
15-08-2018, 20:39 PM,
Post: #9
|
|||
|
|||
RE: CCC is dead after ista/p programming
(15-08-2018, 18:10 PM)radzisz97 Wrote: Can you tell me how to do IT ?Not so easy, but I think it can help: |
|||
15-08-2018, 21:25 PM,
(This post was last modified: 15-08-2018, 23:13 PM by Clusters.)
Post: #10
|
|||
|
|||
RE: CCC is dead after ista/p programming
(15-08-2018, 17:15 PM)radzisz97 Wrote:(15-08-2018, 15:00 PM)bmwcare Wrote:(15-08-2018, 14:56 PM)radzisz97 Wrote: Hi, can someone help me with e60 and ccc? I disconnect the battery with ignition on and ccc is dead now. I try to use ista/p but i forgot about Most and now in my fiber optic is no light. Please help It is possible that you have exceeded the programming quantity status |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content