[snf11lci]

Hello.

I`m confused. Please help me understand. I have X4 F25 08.2015 with MID cluster (nr 2 in picture). I know that for this cars was also HIGH (nr 3 in picture). In F10/F11 HIGH is called 6WA. But as far i know in F25/F26 6WA not exist in VO even if car is factory with HIGH. So if we want to retrofit cluster in F10/11 then we add 6WA into VO and code it. But what about F25/26 ? I checked 2 VO from car with HIGH from factory and me and discovered VO about cluser is this same. No 6WA in VO. Its means that if I want to change from MID to HIGH all will be working fine and only what i need to do is inject CAFT and code it ? of corse first of all I have to clear EPROM else i will got red dot.

For me is important to update regular whole car with ISTA+. So i want to be sure that after this change I will be still alow to update my car and ista don`t wants from me to change cluster.


Many thanks for all who can help in this case

[pica14]

yes you can update to 6Wa but it is posible by esys, i think what ista+ dont posible

[snf11lci]

yes you can update to 6Wa but it is posible by esys, i think what ista+ dont posible

Many thanks for answer. Do you have expirence in this case or you guess ? I need to be sure before i buy new cluster.
Via esys you mean i will have to change some coding in kombi and probably nbt etc right ? Or i have to flash via esys for it works ?

[pica14]

you must first prepare the EEPROM dash before connecting the dash in the car
You have to modify the vo of the car and put it on it. You have 6wa
then via esys you must code the dash and you're done

i have f25 but i think what dash hight dont It's not worth it, I think

[xDrive]

For F25/F26 High kombi comes only with SA610. So i think ista will not update your car.