[Fx82]

Can someone with a E87 LCI upload there trace from dsc and cluster with cruise control installed. (code 540)
After recoding dsc and cluster module in an E87 LCI 130i with automatic transmission the cruise control isn't working anymore. It immediately gives an cruise control failure indication error.
Cruise control was installed from factory.

Attached fa + dsc + cluster

FA:

fa.txt
File Type:
Downloaded:	6 times
Size:	305 bytes

DSC:

FSW_PSW.txt
File Type:
Downloaded:	3 times
Size:	8.61 KB

Cluster:

cluster_FSW_PSW.txt
File Type:
Downloaded:	2 times
Size:	8.61 KB

[jararak]

i think you cannot have 540 - standard cruise control, at least, you have to code cruise control with brake funcion 544 - try it.

btw what error you have?

[Fx82]

I checked that a couple of times and it has $540
$544 is as of 3 series.

The error I have is flexray initialisation but there is no flexray module.

[jararak]

do you have correct date in coding? have you manipulate both cas and frm VO?

[Fx82]

Yes I checked it a couple of times.

[Spitfire555]

i think you cannot have 540 - standard cruise control, at least, you have to code cruise control with brake funcion 544 - try it.

E82/E87/E88 series have the $540 cruise control.

Attached fa + dsc + cluster

You posted the cluster trace twice. There is no DSC trace.

I think you have to code "ACC_AUSSTATTUNG" from "wert_02" to "wert_01" (in cluster).

[zmedak5]

did you change cluster?

[Fx82]

Cluster wasn't changed anyway I've fixed it.
It appears the DME had an error.