[go4it]

Hey, i'm looking for a way to get the key-data stored for PATS-II immobilizer from an ABS to a similar unit, e.g. from one ABS to another to swap the units.

The ABS (AG91-14C205-AA) is built into a Ford Mondeo MK4 Facelift of 2011, so it can't be programmed with Incode/Outcode, you would need a Online dealer access for this.

I've already slaughtered an old ABS device and found an EEPROM on it. I've attached the dump. Maybe somebody knows where the keycodes (on PATS-II it could be max. 8 keys to be stored) are located. My idea was to simply copy them over from the current ABS module into the new one to get immobilizer sattisfied.

The system was also used in Ford Focus MK2, and for shure many other Ford models from the years 2010-2014.

[lupu_sandu]

There are no keycodes inside ABS, only a sync.

[go4it]

What does that mean? I know that ABS, besides of PCM and KVM (keyless cars only) or BCM (key equiped cars only) is part of PATS. My understanding so far was that keycodes are distributed of those modules and all must confirm to get immo off. Maybe this is wrong and only a hash is stored?