Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

SLI coding in G30 - question about signs
11-09-2018, 06:39 AM,
Post: #11
RE: SLI coding in G30 - question about signs
Just a thought here. You say you have evo. But is it entry evo or evo professional navi? Entry cannot display no overtaking sign as I recall on other 5 series.

 | BimmerFiks ASInstagram |

G31 530D xDrive  - Imperial Blau 
Retrofits: 2TB  - 

[/size]
Coming: M-Sport - M Performance Exhaust 

Quote this message in a reply
11-09-2018, 18:47 PM,
Post: #12
RE: SLI coding in G30 - question about signs
You have to set all values in Ecus KAFAS and DKOMBI with "NPI" (No Passing Information) to active.
Quote this message in a reply
[+] 1 user says Thank You to gt678 for this post
08-02-2019, 08:47 AM,
Post: #13
RE: SLI coding in G30 - question about signs
Does anybody know what Value to change for activating the red line in the cluster when going faster than the speed limit. The speed in the HUD turns from white to red, but the cluster doesn‘t show anything different.

ISTA 4.46.14, ISTA 4.46.11 SDP, ISTA-P 72.0, ISTA Launcher 1.46
E-Sys Launcher Pro 5.2.4 with E-Sys 22.10
Lenovo P14s
Quote this message in a reply
08-02-2019, 08:55 AM,
Post: #14
RE: SLI coding in G30 - question about signs
(08-02-2019, 08:47 AM)tste1982 Wrote:  Does anybody know what Value to change for activating the red line in the cluster when going faster than the speed limit. The speed in the HUD turns from white to red, but the cluster doesn‘t show anything different.

Also interested in this. Got SLI with NPI up and running perfectly, but the red over-speeding line in 6WB does not appear even with all SLI/NPI parameters matched with G30's that came with 5AS or 5AT from factory.
Quote this message in a reply
08-02-2019, 09:31 AM,
Post: #15
RE: SLI coding in G30 - question about signs
I think, set these values to "aktiv":
In DKOMBI:
-CB_TACHOZEIGERBAND
-TACHOZEIGERBAND_ENABLE
-PIA_TACHOZEIGERBAND
and in Headunit:
KI_DISP_CB_TACHOZEIGERBAND
Reputation: +1 - tste1982 [+1]
Quote this message in a reply
[+] 1 user says Thank You to gt678 for this post
08-02-2019, 10:37 AM,
Post: #16
RE: SLI coding in G30 - question about signs
(08-02-2019, 09:31 AM)gt678 Wrote:  I think, set these values to "aktiv":
In DKOMBI:
-CB_TACHOZEIGERBAND
-TACHOZEIGERBAND_ENABLE
-PIA_TACHOZEIGERBAND
and in Headunit:
KI_DISP_CB_TACHOZEIGERBAND

Thanks, will try this!
Quote this message in a reply
08-02-2019, 18:19 PM,
Post: #17
RE: SLI coding in G30 - question about signs
(08-02-2019, 09:31 AM)gt678 Wrote:  I think, set these values to "aktiv":
In DKOMBI:
-CB_TACHOZEIGERBAND
-TACHOZEIGERBAND_ENABLE
-PIA_TACHOZEIGERBAND
and in Headunit:
KI_DISP_CB_TACHOZEIGERBAND

Thanks,

will try it out.

ISTA 4.46.14, ISTA 4.46.11 SDP, ISTA-P 72.0, ISTA Launcher 1.46
E-Sys Launcher Pro 5.2.4 with E-Sys 22.10
Lenovo P14s
Quote this message in a reply
12-07-2019, 10:17 AM,
Post: #18
RE: SLI coding in G30 - question about signs
I m curious to know why there isn't no overtaking sign shows up. Only remains the speed limit sign.

My g30 doesn't have 5AS and I just retrofitted the kafas and the hazard button. SLI is working but without the no overtaking sign, the hazard safety button isn't functioning. Fsc for FCW has been injected OK.
Quote this message in a reply
13-07-2019, 07:27 AM, (This post was last modified: 13-07-2019, 07:35 AM by valrossi.)
Post: #19
RE: SLI coding in G30 - question about signs
(12-07-2019, 10:17 AM)valrossi Wrote:  I m curious to know why there isn't no overtaking sign shows up. Only remains the speed limit sign.

My g30 doesn't have 5AS and I just retrofitted the kafas and the hazard button. SLI is working but without the no overtaking sign, the hazard safety button isn't functioning. Fsc for FCW has been injected OK.

Got both the SLI and FCW fsc codes installed successfully:

AppID 287(0x11F)
UpgradeIndex 1(0x01)
SWTType SWTclassic light
FSCStatus accepted
FSCCertStatus not available

----------
AppID 319(0x13F)
UpgradeIndex 1(0x01)
SWTType SWTclassic light
FSCStatus accepted
FSCCertStatus not available

Really need help from fellow members here to provide full details of FDL coding thats needs to be done to have the Intelligent Safefy button and FCW with city-braking to work. 

Thank you in advance!

(11-09-2018, 18:47 PM)gt678 Wrote:  You have to set all values in Ecus KAFAS and DKOMBI with "NPI" (No Passing Information) to active.

Please PM me the actual FDL parameter. I have successfully install the FSC for FCW.

Thank you.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  BMW F10 RHD to LHD coding? morto 10 1,207 6 hours ago
Last Post: muskatas
XZBMW G15 remember last driving mode & ECO PRO MSA memory coding duss46 7 337 26-03-2024, 18:56 PM
Last Post: duss46
XZBMW coding g12 remote key /m display redog4dy 5 183 26-03-2024, 07:23 AM
Last Post: Siki78
  Some news, secure coding coming to new bikes :/ Node 8 999 25-03-2024, 15:13 PM
Last Post: RuleNormaliai
  [Question] Change X1 F48 gearbox jaramillo 9 1,360 24-03-2024, 21:27 PM
Last Post: masa52
  Need help coding out SOS BMW E60 tigre 8 181 24-03-2024, 21:25 PM
Last Post: jararak
  Engine swap E60 535d --> E61 530d coding advice requested Stratofortress 9 296 23-03-2024, 14:59 PM
Last Post: Simoniak
  BMW E87 swap M5 V10 coding cluster Pedrom92 0 97 20-03-2024, 22:50 PM
Last Post: Pedrom92
XZBMW G20- Higher capacity battery coding hallamnet 2 300 19-03-2024, 07:06 AM
Last Post: MasterGt
  Looking for a car which has secure coding to program Fx82 0 193 18-03-2024, 22:57 PM
Last Post: Fx82

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content