[Stefano G]

Hi,

on a PSA BSI VALEO SC667152+95256 CAN BSI-N03-00 the VIN number is written on the eeprom, like pincode?

Vehicle: Peugeot 208

Thanks

[volavka]

Yes in eeprom and NOT crypted well

Good luck

..

[Stefano G]

Yes in eeprom and NOT crypted well

Good luck

..

OK, so making eeprom virgin I can then write the VIN and the pincode with the diagbox as if the bsi were new?

I have to replace a broken bsi with another one and I want to understand if it is better to clone it or to make eeprom virgin and then write VIN and pincode with diagbox.

Thanks

[volavka]

OK, so making eeprom virgin I can then write the VIN and the pincode with the diagbox as if the bsi were new?

Thanks

YES .......

I have to replace a broken bsi with another one and I want to understand if it is better to clone it or make it virgin and then write VIN and pincode with diagbox.

Thanks

Cloning eeprom would be much easier

[CHIKODIAG]

HI
if you have the old bsi just do a clone it will save you a lot of time and reconfigration
good luck

[Stefano G]

HI
if you have the old bsi just do a clone it will save you a lot of time and reconfigration
good luck

Yes, I have the old bsi that is working but not communicate with the LIDAR calculator and the diagbox says "replace the bsi".

[Stefano G]

For curiosity, what kind of data is there inside microcontroller flash SC667152 instead?