Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Programming an eeprom/ reseting or virging
|
07-09-2018, 03:37 AM,
Post: #1
|
|||
|
|||
Programming an eeprom/ reseting or virging
I have UPA eeprom programmmer installed and the hardware and all..I have downloaded a couple of immobilizer dump files on this forum..I can load the files on the software all fine..but my question is, how do I program an eeprom, for the first user like me.. how do I know that this is immo eeprom on the ECU or IMMobox board? Help a brother
|
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
1 user says Thank You to ShayneSparksAuto for this post |
|
07-09-2018, 03:56 AM,
Post: #2
|
|||
|
|||
|
RE: Programming an eeprom/ reseting or virging
Look Youtube
Many Video's from UPA Programmer |
|||
|
|
|
07-09-2018, 04:12 AM,
Post: #3
|
|||
|
|||
|
RE: Programming an eeprom/ reseting or virging
Hello
I was like you in the begining But with the help of members here (advise ) You need a lot of reading in the begining No one can give you how and what From reading and searching and curiosity and love about what your doing Beleive me if you have passion about reaching your goal in this field You will reach it But first you must know what your doing and the principal and rules of this job then you will learn it Second most importtant os this work need you to be focus and calm or you will be sorry ....... With time you will gain knowledge and experience Regards ![[Image: OxNUyuy.jpg]](https://i.imgur.com/OxNUyuy.jpg)  Always new stuff to learn  Skype: raffy.haddad File services : multi brand ecu immo off , VW solutions : immo transfer immo off , pcr 2.1 immo , BMW EDC16 IMMO OFF , .... Yamaha smart key supply pin code from dump ( TMAX , XMAX ) Chevrolet simens sirus D3x D4x D5x delphi MR 140 IMMOOFF I DO MY BEST HERE TO HELP YOU MAKE SOME $$$ BUT ON PRIVATE IS DIFFERENT Members who not report back they're name will be black listed on my list |
|||
| Reputation: +3 - dil6222 [+1] , CHIKODIAG [+1] , chcp [+1] | |||
|
|
|
07-09-2018, 12:30 PM,
(This post was last modified: 15-09-2018, 01:10 AM by CHIKODIAG.)
Post: #4
|
|||
|
|||
|
RE: Programming an eeprom/ reseting or virging
hi
your First Gift I hope it help you To learn and help others good luck |
|||
| Reputation: +2 - raffy haddad [+1] , zeca [+1] | |||
|
|
|
16-09-2018, 03:51 AM,
Post: #5
|
|||
|
|||
|
RE: Programming an eeprom/ reseting or virging
Thanks Friends, I will do more research and tries
|
|||
|
|
|
16-09-2018, 23:50 PM,
Post: #6
|
|||
|
|||
RE: Programming an eeprom/ reseting or virging
(07-09-2018, 04:12 AM)raffy haddad Wrote: Hello Love for doing this is the main thing, if you just doing it for profit it will take longer, trial and error, patience is a virtue, read, read, read, i use to spend about six hour a day trying to learn, i'm pretty good at it now, ask if not sure, always save original files in case you make mistakes you can go back to the original file as well. i find it easy now, but wasn't at first, never used upa, i bought chinese programmer and and mcu 4x4 and they do me well |
|||
|
|
2 users say Thank You to kool bananas for this post |
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
