Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
How to read flash file to make virgin
10-09-2018, 01:17 AM,
Post: #1
|
|||
|
|||
How to read flash file to make virgin
Hello all,
I have a 2012 Infiniti G37 ECM that I would like to make virgin but I don't know what tools to use or where to begin. I cannot find any concrete info on if this can be done via OBD or if I need a reader like KTAG. The ECM is a Hitachi NEC001-097. It doesn't matter if I brick/destroy the ECM as I am just using it to learn. I have PCB de-/soldering experience in the past. Anyone have any reading material on how I can go about achieving this? Thanks CarT! |
|||
10-09-2018, 01:44 AM,
Post: #2
|
|||
|
|||
RE: How to read flash file to make virgin
year 2012 you can use used ecu . but 2014 and up need virgin state. ktag don't support all of them .
|
|||
10-09-2018, 16:25 PM,
Post: #3
|
|||
|
|||
RE: How to read flash file to make virgin
hi...in my opinion U need change VIN in ECM...after this U can adopt key(s)..the same story is with nissan after 2014...BCM checking VIN
I working in Nissan M.D. and succesfully changed VIN via RENOLINK BR |
|||
11-09-2018, 00:03 AM,
Post: #4
|
|||
|
|||
RE: How to read flash file to make virgin
I don't have any problems adopting keys. The problem is the current flash is for an AWD vehicle and I'd like to put it in a RWD car, but Nissan does not allow this flash path (NERS rejects). I think it's best to put the ECM back to "blank" status and then I can flash the RWD file I have. AWD & RWD ECMs are the exact same part.
|
|||
14-09-2018, 00:48 AM,
Post: #5
|
|||
|
|||
RE: How to read flash file to make virgin
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content