Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

nissan consult3 v9.21 w/o security card.
11-09-2018, 20:40 PM,
Post: #1
UInfiniti  nissan consult3 v9.21 w/o security card.
Hi Gent,
Someone know how to "emulate" security card for nissan consult3. I have chines VI (consult4) all is working fine on version 9.21, nats is activated but need security card.
Is It necessary to physically have this card or is there some option to "simulate" this card? I need just for programming in one I-key. I have seen some posts on forum about to generate fingerprint serial and emulate card but how to do?
Any help will be very appreciated.
BR
Dan
Quote this message in a reply
11-09-2018, 20:56 PM,
Post: #2
RE: nissan consult3 v9.21 w/o security card.
Is this any help for you

https://cartechnology.co.uk/showthread.p...ht=consult
Quote this message in a reply
[+] 1 user says Thank You to rightpcb for this post
12-09-2018, 06:28 AM,
Post: #3
RE: nissan consult3 v9.21 w/o security card.
Thanks for help,
anyway this option from link is for consult3plus,
and my is just only consult3 (Chinese clone cs4) - older one.
Quote this message in a reply
12-09-2018, 06:37 AM, (This post was last modified: 12-09-2018, 06:40 AM by mattydr67.)
Post: #4
RE: nissan consult3 v9.21 w/o security card.
Go to this thread
https://cartechnology.co.uk/showthread.p...an+consult

You need Nissan Consult 3 v9.18 + NATS+GT activated
Take care there is a patch too
The patch activate only the software but not NATS+GT
To have all full activated you need an activation cod.
So keep a back up of the original exe file if you will try the patch.
Good luck
Quote this message in a reply
[+] 1 user says Thank You to mattydr67 for this post
12-09-2018, 07:06 AM,
Post: #5
RE: nissan consult3 v9.21 w/o security card.
Hi I tried this consult3 version 9.18 but it's not working with my clone VI. I can add VI to list with "admin" password but when I come back to home page VI is not there.
On version 9.21 everything looks good only security card is missing.....
May is any chance to make some kind of hybrid of that two versions?
Quote this message in a reply
12-09-2018, 07:52 AM,
Post: #6
RE: nissan consult3 v9.21 w/o security card.
What about if you have the interface plugged to the USB and to the car
Then start the Consult III software
And add the serial of your tool.
Try like this.

No there is no chance to have v9.21 like the 9.18
Many peaple asked about this long ago but no chance. I heared that was a v9.21 +NATS+GT realese not for free but I haven't see it anymore.
So I supposed that was just a rumor.
Well peaple tried to make a "salad" between this two versions to combine them to make the NATS+GT to works in v9.21 too but nothing worked ever.
Good luck
Quote this message in a reply
14-09-2018, 06:38 AM,
Post: #7
RE: nissan consult3 v9.21 w/o security card.
ok, I have old version consult3 v9.18, all looks good nats is active, then whenever I try to access/pass security card consult asking me for key, windows with hardware fingerprint number show up, I have generator for that number, name of course consult3 but any number generated is not matching. Is there other generator for that version?


Attached Files Thumbnail(s)
       
Quote this message in a reply
14-09-2018, 10:07 AM, (This post was last modified: 14-09-2018, 10:16 AM by mattydr67.)
Post: #8
RE: nissan consult3 v9.21 w/o security card.
Hi
How did you activate the Nissan Consult 3? Using patch? If yes this is wrong because it will activate the software but it will not activate the NATS
Secondly that keygen is a fake.

Good luck
Quote this message in a reply
14-09-2018, 11:00 AM,
Post: #9
RE: nissan consult3 v9.21 w/o security card.
Yes, I used patch,
First patch called STARTER allow you to run program w/o serial,
then  strange is that is second  patch "nats activator" very similar to patch like in version 9.21 from china clone
but when I click on it show comments that is for version 9.9.
When I install program called activator I'm not able to see my VI and in setup I have 2 other different numbers and my.
All it was in one package on some Russian website. I'm able to click on nats and then is question for activation code..
Subject is OLD but maybe someone remember hot to do?


Attached Files Thumbnail(s)
       
Quote this message in a reply
14-09-2018, 13:17 PM, (This post was last modified: 14-09-2018, 13:18 PM by mattydr67.)
Post: #10
RE: nissan consult3 v9.21 w/o security card.
Well you have to uninstall everything.
Then restart and install back only the software using iso
After you install it run STARTER and copy tge Hardware fingerprint.
Post it here and do not restart your computer till you will activate the software.
Good luck
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Nissan Qashqai 2011 BCM Continental 284B2Br02A with MC9S12XB256CAL read kobi2311 4 51 Yesterday, 20:36 PM
Last Post: kobi2311
  Renault espace 3 button hands free card 7936 Dazl 0 46 19-03-2024, 16:22 PM
Last Post: Dazl
  2009 Nissan cabstar 2.5dci Denso 275800 ecu swap deutsch 3 100 19-03-2024, 09:31 AM
Last Post: raffy haddad
UNissan Nissan infinity BCM TO PIN Naqeeb afghan 0 63 16-03-2024, 08:37 AM
Last Post: Naqeeb afghan
  Nissan Atleon EDC16C41 inmo off need srzar 0 43 09-03-2024, 22:04 PM
Last Post: srzar
UNissan Eeprom dump BCM Nissan Juke BS68 5 229 18-02-2024, 16:15 PM
Last Post: ombra
  Bcm nissan pin konradzd 1 90 16-02-2024, 13:27 PM
Last Post: volavka
  Nissan Hitachi MEC immo off mechanior2686 0 89 06-02-2024, 09:12 AM
Last Post: mechanior2686
UNissan Solved ✔ Nissan Quashqai 2.0d eprom corrupt no start dieselfuel 10 4,985 06-02-2024, 08:06 AM
Last Post: mdwhere24
  Nissan almera n16 pin code nikosmb 4 156 29-01-2024, 15:44 PM
Last Post: dabaca

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content