Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
nissan consult3 v9.21 w/o security card.
11-09-2018, 20:40 PM,
Post: #1
|
|||
|
|||
nissan consult3 v9.21 w/o security card.
Hi Gent,
Someone know how to "emulate" security card for nissan consult3. I have chines VI (consult4) all is working fine on version 9.21, nats is activated but need security card. Is It necessary to physically have this card or is there some option to "simulate" this card? I need just for programming in one I-key. I have seen some posts on forum about to generate fingerprint serial and emulate card but how to do? Any help will be very appreciated. BR Dan |
|||
11-09-2018, 20:56 PM,
Post: #2
|
|||
|
|||
RE: nissan consult3 v9.21 w/o security card.
|
|||
12-09-2018, 06:28 AM,
Post: #3
|
|||
|
|||
RE: nissan consult3 v9.21 w/o security card.
Thanks for help,
anyway this option from link is for consult3plus, and my is just only consult3 (Chinese clone cs4) - older one. |
|||
12-09-2018, 06:37 AM,
(This post was last modified: 12-09-2018, 06:40 AM by mattydr67.)
Post: #4
|
|||
|
|||
RE: nissan consult3 v9.21 w/o security card.
Go to this thread
https://cartechnology.co.uk/showthread.p...an+consult You need Nissan Consult 3 v9.18 + NATS+GT activated Take care there is a patch too The patch activate only the software but not NATS+GT To have all full activated you need an activation cod. So keep a back up of the original exe file if you will try the patch. Good luck |
|||
12-09-2018, 07:06 AM,
Post: #5
|
|||
|
|||
RE: nissan consult3 v9.21 w/o security card.
Hi I tried this consult3 version 9.18 but it's not working with my clone VI. I can add VI to list with "admin" password but when I come back to home page VI is not there.
On version 9.21 everything looks good only security card is missing..... May is any chance to make some kind of hybrid of that two versions? |
|||
12-09-2018, 07:52 AM,
Post: #6
|
|||
|
|||
RE: nissan consult3 v9.21 w/o security card.
What about if you have the interface plugged to the USB and to the car
Then start the Consult III software And add the serial of your tool. Try like this. No there is no chance to have v9.21 like the 9.18 Many peaple asked about this long ago but no chance. I heared that was a v9.21 +NATS+GT realese not for free but I haven't see it anymore. So I supposed that was just a rumor. Well peaple tried to make a "salad" between this two versions to combine them to make the NATS+GT to works in v9.21 too but nothing worked ever. Good luck |
|||
14-09-2018, 06:38 AM,
Post: #7
|
|||
|
|||
RE: nissan consult3 v9.21 w/o security card.
ok, I have old version consult3 v9.18, all looks good nats is active, then whenever I try to access/pass security card consult asking me for key, windows with hardware fingerprint number show up, I have generator for that number, name of course consult3 but any number generated is not matching. Is there other generator for that version?
|
|||
14-09-2018, 10:07 AM,
(This post was last modified: 14-09-2018, 10:16 AM by mattydr67.)
Post: #8
|
|||
|
|||
RE: nissan consult3 v9.21 w/o security card.
Hi
How did you activate the Nissan Consult 3? Using patch? If yes this is wrong because it will activate the software but it will not activate the NATS Secondly that keygen is a fake. Good luck |
|||
14-09-2018, 11:00 AM,
Post: #9
|
|||
|
|||
RE: nissan consult3 v9.21 w/o security card.
Yes, I used patch,
First patch called STARTER allow you to run program w/o serial, then strange is that is second patch "nats activator" very similar to patch like in version 9.21 from china clone but when I click on it show comments that is for version 9.9. When I install program called activator I'm not able to see my VI and in setup I have 2 other different numbers and my. All it was in one package on some Russian website. I'm able to click on nats and then is question for activation code.. Subject is OLD but maybe someone remember hot to do? |
|||
14-09-2018, 13:17 PM,
(This post was last modified: 14-09-2018, 13:18 PM by mattydr67.)
Post: #10
|
|||
|
|||
RE: nissan consult3 v9.21 w/o security card.
Well you have to uninstall everything.
Then restart and install back only the software using iso After you install it run STARTER and copy tge Hardware fingerprint. Post it here and do not restart your computer till you will activate the software. Good luck |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content