[larshutten]

Car has cas3? if so change is very high you need to reset egs isn. Can be done with explorer, Autohex and Abrites. But last one fails very often....

[Bimmer540]

I think all 6HP and 8Hp will requie a isn code

You're wrong

[inotherwords]

Can I use Winkfp and NcsExpert?

Yes, just flash and default code it. That's all.

[Bimmer540]

Now I get confused!

[SweetBMW]

if its the old type of gear selector, not the joystick, its no isn. Just flash and code. good to go.

[inotherwords]

if its the old type of gear selector, not the joystick, its no isn. Just flash and code. good to go.

Any 6HP on E9x has old type selector. BTW I've flashed 6HP21 on E60 LCI once and it worked.

[Bimmer540]

if its the old type of gear selector, not the joystick, its no isn. Just flash and code. good to go.

Any 6HP on E9x has old type selector. BTW I've flashed 6HP21 on E60 LCI once and it worked.

Can I use K+Dcan or Icom?

[SweetBMW]

You can use both. But icom is recommended.