Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
EVO 3.2 dead after region swap
20-09-2018, 14:41 PM,
(This post was last modified: 24-09-2018, 10:02 AM by Wibbles.)
Post: #11
|
|||
|
|||
RE: EVO 3.2 dead after region swap
|
|||
24-09-2018, 08:23 AM,
Post: #12
|
|||
|
|||
RE: EVO 3.2 dead after region swap
Yes, I have it too.
|
|||
25-09-2018, 19:23 PM,
Post: #13
|
|||
|
|||
RE: EVO 3.2 dead after region swap
Guys what do you mean by ' ERASING V850'
V850 then repair Nand this what i really know, what am i missing please? All my knowledge is free for exchange with valuable information
Sharing->Development
|
|||
25-09-2018, 19:27 PM,
Post: #14
|
|||
|
|||
RE: EVO 3.2 dead after region swap
Hi Mwahab
i think there are a spécial tools developer.prg that is secret and some people have it that his doing all this job with the Tools32 this is my understanding |
|||
19-12-2018, 08:51 AM,
Post: #15
|
|||
|
|||
RE: EVO 3.2 dead after region swap
I tried it also with a HW 2.3 unit with the same result.
I switched software (psdz V59) frum US to ECE, but always the screen only shows the start-up and then switches to black screen. In fault memory there is written "Softwaremanipulation in Coding" (or similar). Then I switched the software (psdz V59) after 850 deletion back to US software and now I´m only possible to code it with a ECE FA and the same failure. Has someone a solution for me to solve it on my own bench for these units? |
|||
20-12-2018, 16:58 PM,
Post: #16
|
|||
|
|||
RE: EVO 3.2 dead after region swap
Try this .prg file. It was part of one of the very first HUTOOLS2.1, I believe.
I have not tried it myself, and always, use at own risk. It might not work with newer units. (25-09-2018, 19:27 PM)sacaman Wrote: Hi Mwahab |