[darek_naprawa]

It will help someone off immo berlingo 1.9 d 2005r.Ecu lucas.

[mecadiag]

U cant do immo off on this ecu only virgin ,u need only swap the eeprom if u want change ecu

[darek_naprawa]

I can not change eprom because it is the second BSI.

[mecadiag]

If u havent the old bsi, make virgin to the second one & programm it with pps using the pin of this ecu:AGSN

[darek_naprawa]

Not simply will add a pump valve? Maybe you know how to do? I used ecu and bsi and key, in the old ECU, BSI does not kluczyka.Czy can add to the old BSI key, but I do not know whether it can be used?

[satmanek]

Perhaps you have a newer version of the car, the older enough to make order out of the valve code. And this must match the valve code, ECU, BSI and key. Try to read the pin from the old BSI, BSI reprogrammed for virgin and do it on the original. Although sometimes valve code hangs and does not allow add up, then you need to replace it with a new, encrypted or plain.

Slawek

[darek_naprawa]

Where is the valve code stored in the ECU or BSI. Maybe it's just rewrite the old memory to the new.

[satmanek]

Only BSI on virgin and learn / telecode. To just copy the memory you need to have the exact same version of BSI and is not easy to hit. You can program almost every BSI with Lexia. You can also disable the immo ... hammer

SlaweK

[darek_naprawa]

Can not find in any program.

---

How do I turn off the immo?