[Reshi]

hello

i just installed brand new pcm in ford escape 2016 model now in ids it requires to program it

and want pcm part number, Tear Tag and Calibraiton number

tear tag was found in as built part number on pcm but i cant find Calibration number

can any body help?

thanks
Regards

[xtac1080]

What's the VIN? Is old PCM junk or still readable?

[Reshi]

Old pcm not avilabkr

[gazeddy]

you only need one of them. not all 3

[fraserauto]

Tear Tag works well

[Reshi]

Hello
Ya it works now another issue
I need to program transmission also as per ids it has to be donr
I cant find solenoid body strategy and solenoid identification number
Any info where can i find it its 2016 ford escape

Vin: 1FMCU0GX0GUB63380

[gregd72002]

Hello
Ya it works now another issue
I need to program transmission also as per ids it has to be donr
I cant find solenoid  body strategy and solenoid identification number
Any info where can i find it its 2016 ford escape

Vin: 1FMCU0GX0GUB63380

See attached.    

[xtac1080]

Here you go try this. ID plate location is at the bottom

[Zemiel]

Hi, everybody. I have a Ford Kuga 12.26.2017 release. 2.5 l. FWD AT. In Russia it has 149 HP(due to taxes and insurance) I want to flash it with official Escape firmware to get the horses back in the herd

Question: please tell me (who has the same engine - 2.5 l. FWD AT.) what are the latest PCM calibrations for this engine now coming on your cars (*.VBF).

My VIN:Z6FAXXESMAHK77157

[Joe2]

Hello Everybody,

Could you please help me understand how PATS system = immobilizer was resolved for new PCM in ESCAPE  ? You have IDS online access ? Or can you replace PCM on brand new without PATS update ? 

Can you replaced by USED PCM (not brand new) without old PCM and without PATS update ?

Thanks for any knowladge share !